Other Name: Tappet - Valve Lash; Adjuster Valve Lash
Item Weight: 0.40 Pounds
Condition: New
Fitment Type: Direct Replacement
SKU: 5096539AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
Fits the following 2006 Chrysler Crossfire Submodels:
Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
2006 Chrysler Crossfire Lash Adjuster Parts and Q&A
Q: How to Service and Repair Lash Adjusters on 2006 Chrysler Crossfire?
A: To work on hydraulic lifters, first take out the Cylinder Head Cover and the Camshaft Bearing Bridge Assembly. Place a 2 mm drift through the center of the hydraulic lifter, press it out so it sits separately from the rocker arm and make sure it does not move. Dip each lifter assembly into cleaning solvent to get rid of varnish and sludge and careful inspection of wear along the side and base of every lifter is necessary. Put the compensation disc (1) in the lifter bore in the head and push the hydraulic lifter (3) into the lifter track on the rocker arm (1), checking that the locking ring snaps into place. After that, put the Camshaft Bearing Bridge assembly back on the cylinder head and the Cylinder Head Cover.