How to Maintain a Seat Switch on 2006 Chrysler Crossfire?

The first step to servicing the power seat switch is to take out the bolt that holds the side panel to the seat base, after removing the front seat. Press in and down on the side with the switches to release the side panel, then disconnect the connectors of the power seat switch harness. Peel back the cable straps to get to the wiring harness and pull off the side panel from the seat floor. While setting up, attach the harness in the place it was first intended to avoid touching and stopping moving parts. Do not change the location of the wiring harness and connect all the harness connectors to the power seat switch relocation switch. Place the side panel nearest to the handlebar balls so that the switches face down and install the side panel attaching screw. Next, set the front seat back in place and put the negative battery cable back.

OEM 2006 Chrysler Crossfire Seat Switch

Seat Adjust Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Seat Switches found

View related parts
2006 Chrysler Crossfire Seat Switch, Passenger Side Part Number: 1BF40XDVAA
Product Specifications
- Other Name: Switch - Power Seat; Power Seat Switch, Right; Switch; Switch Power Seat; Power Seat Switch
- Position: Passenger Side
- Item Weight: 1.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1BF40XDVAA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
2006 Chrysler Crossfire Seat Switch, Driver Side Part Number: 1BF41XDVAA
Product Specifications
- Other Name: Switch - Seat; Power Seat Switch, Left; Switch; Switch Power Seat; Power Seat Switch
- Position: Driver Side
- Replaces: 1BF41AA7AA
- Item Weight: 1.50 Pounds
- Item Dimensions: 19.6 x 8.2 x 1.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1BF41XDVAA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 3.2L V6, 6 Cyl 3.2 L GAS
View related parts
2006 Chrysler Crossfire Seat Heat Switch Part Number: 5097522AA
Product Specifications
- Other Name: Heated Seat; Seat Heater Switch; Switch; Switch Heated Seat
- Item Weight: 0.70 Pounds
- Item Dimensions: 8.2 x 3.5 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5097522AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS

2006 Chrysler Crossfire Seat Switch Parts and Q&A

Q: How to Maintain a Seat Switch on 2006 Chrysler Crossfire?
A: The first step to servicing the power seat switch is to take out the bolt that holds the side panel to the seat base, after removing the front seat. Press in and down on the side with the switches to release the side panel, then disconnect the connectors of the power seat switch harness. Peel back the cable straps to get to the wiring harness and pull off the side panel from the seat floor. While setting up, attach the harness in the place it was first intended to avoid touching and stopping moving parts. Do not change the location of the wiring harness and connect all the harness connectors to the power seat switch relocation switch. Place the side panel nearest to the handlebar balls so that the switches face down and install the side panel attaching screw. Next, set the front seat back in place and put the negative battery cable back.