OEM 2006 Chrysler Crossfire Washer Reservoir

2006 Chrysler Crossfire Washer Reservoir Parts and Q&A

• Q: How to Maintain and Fix a Washer Reservoir on 2006 Chrysler Crossfire?

  A: Unhook the negative battery cable before working on the windshield washer reservoir. Pull out the rear part of the right front inner fender liner, then part the connectors to the washer fluid level switch and washer pump motor wires. Start by removing the hose connecting the washer pump motor with the washer, then remove the hose connecting the washer reservoir to the filler tube. Remove the bolt that attaches the washer reservoir to the bottom of the car and gently push the washer reservoir forward so the grommets come loose and you can get to the reservoir that is behind the right front wheel. Reconnect the reservoir further back beneath the right front wheel and then straighten the rubber grommets. After that, hook up the washer fluid filler tube and tighten the washer reservoir attachment bolt. Connect the washer fluid level switch harness connector and the washer pump motor harness connector after that and install the washer pump motor supply hose. After that, secure the right front inner fender liner and hook up the negative battery cable.