How to Replace a Front Wiper Motor on 2006 Chrysler Pacifica?

Before changing the front wiper motor, make sure you take out the battery's negative cable. After that, take out the wiper module. On the bench, separate the socket and ball joint at the end of the bell crank in the wiper module. Loosen the three bolts that hold the front wiper motor to the linkage or module and remove the motor. To install, set the wiper motor into the wiper module and fix the three mounting bolts in the front wiper motor. Put the socket and ball joint on the last part of the bell crank and once that is done, add the wiper module. Connect the ground cable to the battery, test both the vehicle and its systems and make the final step of closing the hood.

OEM 2006 Chrysler Pacifica Wiper Motor

Windshield Wiper Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Wiper Motors found

View related parts
2006 Chrysler Pacifica Wiper Motor Part Number: 5102228AA
Product Specifications
- Other Name: Motor - Windshield Wiper; Windshield Wiper Motor; Front Motor; Motor Windshield Wiper
- Item Weight: 3.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5102228AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2006 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
2006 Chrysler Pacifica Wiper Motor Part Number: 4894283AC
Product Specifications
- Other Name: Motor, Liftgate Wiper; Back Glass Wiper Motor; Rear Motor
- Replaces: 4894283AB, 4894283AA
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4894283AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2006 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 3.5L V6, 3.8L V6, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2006 Chrysler Pacifica Wiper Motor Parts and Q&A

Q: How to Replace a Front Wiper Motor on 2006 Chrysler Pacifica?
A: Before changing the front wiper motor, make sure you take out the battery's negative cable. After that, take out the wiper module. On the bench, separate the socket and ball joint at the end of the bell crank in the wiper module. Loosen the three bolts that hold the front wiper motor to the linkage or module and remove the motor. To install, set the wiper motor into the wiper module and fix the three mounting bolts in the front wiper motor. Put the socket and ball joint on the last part of the bell crank and once that is done, add the wiper module. Connect the ground cable to the battery, test both the vehicle and its systems and make the final step of closing the hood.