How to service a Brake Fluid Level Sensor on 2006 Chrysler Sebring?

In order to service the brake fluid level sensor, take off the wiring harness connected to the reservoir switch. Inserting a screwdriver in the retaining tabs of the switch and remove it. To install, Lorenzo shifts the new switch until it fits, and reattaches the wiring harness.

OEM 2006 Chrysler Sebring Brake Fluid Level Sensor

Brake Fluid Liquid Level Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Fluid Level Sensor found

View related parts
2006 Chrysler Sebring Level Sensor Part Number: 5019403AA
Product Specifications
- Other Name: Switch - Brake Fluid Level; Brake Fluid Level Switch; Switch Brake Fluid Level
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.7 x 2.7 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5019403AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Sebring Submodels:
- Base, GTC, LX, LXi, Limited, TSi, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS

2006 Chrysler Sebring Brake Fluid Level Sensor Parts and Q&A

Q: How to service a Brake Fluid Level Sensor on 2006 Chrysler Sebring?
A: In order to service the brake fluid level sensor, take off the wiring harness connected to the reservoir switch. Inserting a screwdriver in the retaining tabs of the switch and remove it. To install, Lorenzo shifts the new switch until it fits, and reattaches the wiring harness.