How to Service and Repair the ABS Control Module for Antilock Brakes on 2006 Chrysler Sebring?

First, to service or repair the Hydraulic Control Assembly for Antilock Brakes, remove the Integrated Control Unit (ICU) from the vehicle. Remove the wiring harness from the pump/motor on the CAB and then remove the four bolts holding the CAB to the HCU. Put the CAB side back onto the HCU after it is detached from the MAT and then tighten the 4 bolts down to a torque of 2 Nm ("newton meters") or 17 inch lbs. Restore the wiring from the pump/motor harness to the CAB, put in the ICU and bleed the base and ABS systems of the pump while they are still installed.

OEM 2006 Chrysler Sebring ABS Control Module

Anti Lock Brake Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 ABS Control Modules found

View related parts
2006 Chrysler Sebring Modulator Valve Part Number: 5142283AA
Product Specifications
- Other Name: HCU - ABS; ABS Hydraulic Assembly; ABS Control Module; ABS Control Unit; Modulator; Hydraulic Control Unit Anti-Lock Brake System
- Item Weight: 5.20 Pounds
- Item Dimensions: 8.3 x 6.1 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5142283AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Sebring Submodels:
- Base, GTC, Limited, TSi, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
2006 Chrysler Sebring Control Module Part Number: 5159191AB
Product Specifications
- Other Name: Control - Anti-Lock Brakes; ABS Control Module; ABS Control Unit; Module Anti-Lock Brakes
- Item Weight: 2.30 Pounds
- Item Dimensions: 6.2 x 6.1 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5159191AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Sebring Submodels:
- Base, GTC, Limited, TSi, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS

2006 Chrysler Sebring ABS Control Module Parts and Q&A

Q: How to Service and Repair the ABS Control Module for Antilock Brakes on 2006 Chrysler Sebring?
A: First, to service or repair the Hydraulic Control Assembly for Antilock Brakes, remove the Integrated Control Unit (ICU) from the vehicle. Remove the wiring harness from the pump/motor on the CAB and then remove the four bolts holding the CAB to the HCU. Put the CAB side back onto the HCU after it is detached from the MAT and then tighten the 4 bolts down to a torque of 2 Nm ("newton meters") or 17 inch lbs. Restore the wiring from the pump/motor harness to the CAB, put in the ICU and bleed the base and ABS systems of the pump while they are still installed.