How to Service the Drive Belt for Power Steering on 2006 Chrysler Sebring?

To start servicing the power steering pump belt, you should raise the car on a hoist, take off the right front wheel and remove the belt splash shield as well. After that, remove the air conditioning belt and then loosen the pivot bolt and the locking bolt/nut next to it. Push the assembly inside the engine and remove the belt while the pump is loose. Brush away any objects and wipe the belt pulley areas clean from grease and oil before you put the new belt in place. The belt should be replaced if it has major wear, fraying or substantial glazing; small cracks across the ribbed side are fine, but no parallel cracks are acceptable. Adding any belt dressing or restorer to a Poly-V Belt is not recommended. Get the power steering pump belt and put it where the pulleys connect. Insert your 1/2" drive breaker bar into the square opening on the bracket for the power steering pump and then tighten that adjusting bolt/nut by turning it clockwise. Adjust the pivot bolt, place the air conditioning compressor/generator belt, then the belt splash shield and right front wheel and finish by lowering the vehicle.

OEM 2006 Chrysler Sebring Drive Belt

Serpentine Belt

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Drive Belts found

View related parts
2006 Chrysler Sebring Serpentine Belt Part Number: 4861733AC
$41.84 MSRP: $61.40
You Save: $19.56 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Alternator And A/C Compress; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Alternator Belt; Belt Alternator And A/C Compressor; Belt Alternator Drive
- Replaces: 4861722AB, 4861733AA
- Item Weight: 0.70 Pounds
- Item Dimensions: 17.8 x 9.4 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4861733AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Sebring Submodels:
- Base | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
2006 Chrysler Sebring Serpentine Belt Part Number: 4892444AA
Product Specifications
- Other Name: Belt - Power Steering; Accessory Drive Belt; Serpentine Belt Drive Kit; V-Belt; Power Steering Belt; Belt Power Steering; Drive Belt
- Replaces: 4892749AB, 4892749AA
- Item Weight: 1.20 Pounds
- Item Dimensions: 19.4 x 9.8 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4892444AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Sebring Submodels:
- Base, GTC, LX, LXi, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
2006 Chrysler Sebring Drive Belt Part Number: 4892830AA
Product Specifications
- Other Name: Alternator And A/C Compress; Serpentine Belt Drive Kit; Serpentine Belt; V-Belt; Belt Alternator And A/C Compressor
- Item Weight: 0.70 Pounds
- Item Dimensions: 12.0 x 3.6 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4892830AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Sebring Submodels:
- Base, GTC, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
2006 Chrysler Sebring Serpentine Belt Part Number: 4892562AA
Product Specifications
- Other Name: Belt - Alternator And A/C Compress; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Alternator And A/C Compressor
- Item Weight: 0.70 Pounds
- Item Dimensions: 13.5 x 3.4 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4892562AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Sebring Submodels:
- Base, GTC, Limited, TSi, Touring | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS

2006 Chrysler Sebring Drive Belt Parts and Q&A

Q: How to Service the Drive Belt for Power Steering on 2006 Chrysler Sebring?
A: To start servicing the power steering pump belt, you should raise the car on a hoist, take off the right front wheel and remove the belt splash shield as well. After that, remove the air conditioning belt and then loosen the pivot bolt and the locking bolt/nut next to it. Push the assembly inside the engine and remove the belt while the pump is loose. Brush away any objects and wipe the belt pulley areas clean from grease and oil before you put the new belt in place. The belt should be replaced if it has major wear, fraying or substantial glazing; small cracks across the ribbed side are fine, but no parallel cracks are acceptable. Adding any belt dressing or restorer to a Poly-V Belt is not recommended. Get the power steering pump belt and put it where the pulleys connect. Insert your 1/2" drive breaker bar into the square opening on the bracket for the power steering pump and then tighten that adjusting bolt/nut by turning it clockwise. Adjust the pivot bolt, place the air conditioning compressor/generator belt, then the belt splash shield and right front wheel and finish by lowering the vehicle.