How to Maintain a Washer Pump on 2006 Chrysler Sebring?

Unhook the negative remote cable from the battery before dealing with the windshield washer pump. Carefully remove a small part of the bumper facia to get to the reservoir pump and then lay a bucket beneath the reservoir if fluids should leak from there. Squeeze the pump tightly, turn it and then draw it out of the reservoir through the grommet, making sure not to prick the reservoir. Take out and throw away the rubber grommet included with the reservoir. Make sure to purchase a new grommet; while firmly holding the pump and turning it, push it into the reservoir, so as not to damage it. In case you did not totally remove the fascia, reinstall it where required. Put more washer solvent in the reservoir and then connect the battery negative remote cable as before.

OEM 2006 Chrysler Sebring Washer Pump

Windshield Washer Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Washer Pumps found

View related parts
2006 Chrysler Sebring Washer Pump Part Number: 5103452AA
$87.90 MSRP: $183.00
You Save: $95.10 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump - Washer, Windshield; Back Glass Washer Pump; Windshield Washer Pump; Washer Pump Repair Kit; Front Washer Pump; Rear Washer Pump; Pump Washer, Windshield
- Replaces: 55077241AA, 5015938AA, 5012602AA, 55077241AB
- Item Weight: 0.60 Pounds
- Item Dimensions: 2.0 x 2.2 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5103452AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Sebring Submodels:
- Base, GTC, JX, JXi, LX, LXi, Limited, TSi, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
2006 Chrysler Sebring Washer Pump, Front Part Number: 5019258AA
Product Specifications
- Other Name: Motor - Washer, Headlamp; Headlight Washer Pump Grommet, Front; Windshield Washer Pump; Pump Washer, Headlamp
- Position: Front
- Item Weight: 0.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5019258AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Sebring Submodels:
- Base, LX, LXi, Limited, TSi, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS

2006 Chrysler Sebring Washer Pump Parts and Q&A

Q: How to Maintain a Washer Pump on 2006 Chrysler Sebring?
A: Unhook the negative remote cable from the battery before dealing with the windshield washer pump. Carefully remove a small part of the bumper facia to get to the reservoir pump and then lay a bucket beneath the reservoir if fluids should leak from there. Squeeze the pump tightly, turn it and then draw it out of the reservoir through the grommet, making sure not to prick the reservoir. Take out and throw away the rubber grommet included with the reservoir. Make sure to purchase a new grommet; while firmly holding the pump and turning it, push it into the reservoir, so as not to damage it. In case you did not totally remove the fascia, reinstall it where required. Put more washer solvent in the reservoir and then connect the battery negative remote cable as before.