How to Service an Air Bag Sensor on 2006 Chrysler Sebring?

In order to service the impact sensor, unscrew battery negative cable and wait two minutes. Defit the lower B-pillar trim, disconnect SAS connector, and take off sensor. Install the new SAS, screws 7 N.m, reconnect the SAS, and refit the trim. Do not reconnect the battery until testing has been done.

OEM 2006 Chrysler Sebring Air Bag Sensor

Air Bag Impact Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Air Bag Sensor found

View related parts
2006 Chrysler Sebring Impact Sensor, Front Part Number: 4671779AC
$48.02 MSRP: $103.00
You Save: $54.98 (54%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Impact; Air Bag Impact Sensor, Center, Front; Air Bag Sensor; Front Impact Sensor; Side Impact Sensor; Airbag Impact Sensor.
- Position: Front
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.8 x 2.6 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4671779AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Sebring Submodels:
- Base, LX, LXi, Limited, TSi, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS

2006 Chrysler Sebring Air Bag Sensor Parts and Q&A

Q: How to Service an Air Bag Sensor on 2006 Chrysler Sebring?
A: In order to service the impact sensor, unscrew battery negative cable and wait two minutes. Defit the lower B-pillar trim, disconnect SAS connector, and take off sensor. Install the new SAS, screws 7 N.m, reconnect the SAS, and refit the trim. Do not reconnect the battery until testing has been done.