How to Properly Remove and Install Pistons and Connecting Rods in an Engine on 2006 Dodge Caravan?

To remove pistons and connecting rods, first remove the cylinder head. Use a ridge reamer on the cylinder bores and then remove the oil pan and Balance Shaft Carrier Assembly. Mark connecting rod caps, remove bolts and extract assemblies carefully. For installation, ring gaps, oil components and torque bolts are staggered appropriately. Finally check clearance, and reinstall components.

OEM 2006 Dodge Caravan Piston

Engine Pistons

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Pistons found

View related parts
2006 Dodge Caravan Piston Part Number: 68086046AB
$105.19 MSRP: $134.00
You Save: $28.81 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaces: 68086046AA
- Item Weight: 2.70 Pounds
- Item Dimensions: 10.6 x 4.9 x 3.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68086046AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Caravan Submodels:
- SE | 4 Cyl 2.4 L GAS
View related parts
2006 Dodge Caravan Piston Part Number: 4666130AB
Product Specifications
- Other Name: Piston Pin And Rod; Piston Pin And Rod
- Replaces: 4897772AB, 4666130AA
- Item Weight: 3.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4666130AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Caravan Submodels:
- Base, C/V, SE, SXT, Sport | 3.3L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS

2006 Dodge Caravan Piston Parts and Q&A

Q: How to Properly Remove and Install Pistons and Connecting Rods in an Engine on 2006 Dodge Caravan?
A: To remove pistons and connecting rods, first remove the cylinder head. Use a ridge reamer on the cylinder bores and then remove the oil pan and Balance Shaft Carrier Assembly. Mark connecting rod caps, remove bolts and extract assemblies carefully. For installation, ring gaps, oil components and torque bolts are staggered appropriately. Finally check clearance, and reinstall components.