Other Name: Seat Belt - Rear Center Shoulder; Seat Belt Lap and Shoulder Belt, Rear Center, Rear Inner; Seat Belt Assembly; Center Seat Belt; Seat Belt Rear Center Shoulder
Position: Rear Center Inner
Replaces: 1BY501DVAA, 1BY501DVAB, 1BY501DVAC
Item Weight: 2.40 Pounds
Item Dimensions: 7.2 x 5.2 x 4.9 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 1BY501DVAD
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2006 Dodge Charger Submodels:
Base, Daytona R/T, Pursuit, R/T, SE, SRT8, SXT | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
Other Name: Seat Belt - Rear Center Shoulder; Seat Belt Lap and Shoulder Belt, Rear Inner; Seat Belt Assembly; Center Seat Belt; Seat Belt Rear Center Shoulder
Position: Rear Center Inner
Replaces: 1BY501D1AA, 1BY501D1AC, 1BY501D1AB
Item Weight: 2.40 Pounds
Item Dimensions: 10.2 x 5.3 x 4.9 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 1BY501D1AD
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2006 Dodge Charger Submodels:
Base, Daytona R/T, Pursuit, R/T, SE, SRT8, SXT | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
Other Name: Seat Belt - Front Outer; Seat Belt Lap and Shoulder Belt, Front Right; Retractor Assembly; Seat Belt Front Outer
Position: Front Outer Passenger Side
Item Weight: 2.80 Pounds
Condition: New
Fitment Type: Direct Replacement
SKU: UX521DVAE
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2006 Dodge Charger Submodels:
Base, Daytona R/T, Pursuit, R/T, SE, SRT8, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
2006 Dodge Charger Seat Belt Parts and Q&A
Q: How to Maintain Your Seat Belt and Retractor on 2006 Dodge Charger?
A: To service the front seat belt and retractor, disconnect the negative cable on the battery and wait two minutes. Remove various trim covers and bolts, disconnect the tensioner squib connector and pull the retractor inboard. Reinstall components, including correct torque settings, do not reconnect battery until testing is done.