JeepParts
My Garage
My Account
Cart
OEM 2006 Dodge Ram 2500 Evaporator
A/C Evaporator Core- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Evaporators found
2006 Dodge Ram 2500 Evaporator Core Part Number: 68234947AA
Product Specifications- Other Name: Evaporato - A/C Evaporator Core Case Drain Seal, Insulator, Seal, and Repair Kit.; Insulator
- Replaces: 5140726AB, 5073969AA, 5140726AD, 5140726AA, 5140726AC, V9900108AB, V9900108
- Item Weight: 4.60 Pounds
- Item Dimensions: 16.7 x 10.0 x 9.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68234947AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2006 Dodge Ram 2500 Evaporator Core Part Number: 5073970AB
Product Specifications- Other Name: Evaporato - A/C; A/C Evaporator Core; A/C Evaporator Core Repair Kit; Evaporator A/C; A/C Evaporator; Evaporator
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5073970AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2006 Dodge Ram 2500 Evaporator Parts and Q&A
- Q: How to Service and Repair an Evaporator on 2006 Dodge Ram 2500?A: First take off the HVAC casing and keep it on a workbench; then open up the housing to access the A/C evaporator. Separate the probe of the evaporator temperature sensor from the fins of the A/C evaporator and push the wire lead through a gap in the sponsor housing. Should the foam around the evaporator be broken or misshapen, it should be changed. Gently remove both the A/C evaporator and its foam insulator from inside the upper half of the HVAC housing (4) and unscrew the foam seal from the two A/C evaporator tubes as required. If you are installing, add 60 milliliters (2 fluid ounces) of oil that is right for your car's compressor to the system and secure the foam in the HVAC housing to serve as insulation. Install the evaporator unit and its insulator into the upper half of the HVAC housing and put the evaporator temperature sensor through the A/C evaporator's fins, running the wire lead into the hole at the top of the housing. In the end, connect and attach the HVAC housing to the system.
Related 2006 Dodge Ram 2500 Parts
2006 Dodge Ram 2500 Heater Core
2006 Dodge Ram 2500 Blend Door Actuator
2006 Dodge Ram 2500 Blower Motor Resistor
2006 Dodge Ram 2500 A/C Accumulator
2006 Dodge Ram 2500 A/C Compressor
2006 Dodge Ram 2500 A/C Condenser
2006 Dodge Ram 2500 A/C Hose
2006 Dodge Ram 2500 A/C Switch
2006 Dodge Ram 2500 A/C System Valve Core
2006 Dodge Ram 2500 Blower Control Switches
2006 Dodge Ram 2500 Blower Motor
2006 Dodge Ram 2500 HVAC Pressure Switch