Other Name: Insulator - Engine Mount; Engine Mount Bracket, Right; Engine Mount, Right; Engine Mount Torque Strut; Engine Support; Mount Bracket; Front Mount; Mount Insulator; Mount; Insulator Engine Mount; Engine Mount Bracket
Position: Passenger Side
Replaces: 52121506AB, 52121530AB
Item Weight: 6.30 Pounds
Item Dimensions: 4.6 x 5.4 x 7.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 52122710AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2006 Dodge Ram 3500 Submodels:
Laramie, SLT, ST, SXT, Sport | 6 Cyl 5.9 L DIESEL, 8 Cyl 5.7 L GAS
Other Name: Bracket - Engine Mount; Engine Mount; Engine Mount Torque Strut; Engine Mount Bracket; Front Mount; Mount Insulator; Insulator Engine Mount
Replaces: 52021713AA
Item Weight: 2.60 Pounds
Item Dimensions: 3.4 x 4.1 x 6.9 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 52021713AB
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
Other Name: Bracket - Engine Mount; Engine Mount; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Mount Insulator; Insulator Engine Mount
Replaces: 52122714AA
Item Weight: 2.70 Pounds
Item Dimensions: 3.5 x 3.9 x 6.9 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 52122714AB
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
Other Name: Bracket - Engine Mount; Left Engine Mount; Torque Strut; Motor Mount; Mount Bracket; Front Mount; Mount Insulator; Insulator Engine Mount; Engine Mount Bracket
Position: Driver Side
Item Weight: 7.30 Pounds
Item Dimensions: 6.0 x 7.0 x 7.2 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 52121507AB
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2006 Dodge Ram 3500 Submodels:
Laramie, SLT, ST, SXT, Sport | 6 Cyl 5.9 L DIESEL, 8 Cyl 5.7 L GAS
Other Name: Bracket - Engine Mount; Left Engine Mount; Torque Strut; Motor Mount; Front Mount; Mount Insulator; Insulator Engine Mount; Engine Mount Bracket
Position: Driver Side
Replaces: 52121505AB
Item Weight: 9.00 Pounds
Item Dimensions: 8.2 x 6.0 x 4.9 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 52121505AC
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
Q: How to Service and Repair a Front Engine Mount on a 2WD on 2006 Dodge Ram 3500?
A: Prior to servicing the front engine mount in a 2WD car, disconnect the negative battery cable and raise it. First, remove the engine mount from the vehicle with bolts and use engine support fixture special tool #8534 to elevate the engine. After that, unscrew the engine mount to insulator bolts (1) and pull the insulator (2) away from the engine. While installing, place the insulator (2) onto the engine and then glue the mount to the engine block with Mopar Lock and Seal Adhesive, Medium Strength Threadlocker on the left engine bracket to front axle bolts. After installing the mount, place all mounting bolts in place and tighten them to the specified 61 Nm. With engine support fixture special tool #8534, lower the engine until it drops. After that, fit the mount with bolts and tighten them to 61 Nm (45 ft. lbs.) on both sides. After that, lower the jack stand and attach the negative battery cable.