How to Service and Correctly Install a Flywheel on 2006 Dodge Ram 3500?

First, take off the transmission, after which remove the bolts and flexplate 1. For installation, lay the flexplate or flywheel on the crank shaft and tighten the bolts by hand. For automatic transmissions, first tighten the flex plate retaining bolts to 95 Nm (70 ft. lbs.) before fitting the transmission again.

OEM 2006 Dodge Ram 3500 Flywheel

Clutch Flywheel

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Flywheels found

View related parts
2006 Dodge Ram 3500 Flywheel Part Number: 53022042AA
$198.28 MSRP: $293.00
You Save: $94.72 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Item Weight: 44.60 Pounds
- Item Dimensions: 16.0 x 16.3 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53022042AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2006 Dodge Ram 3500 Submodels:
- Laramie, SLT, ST, SXT, Sport | 8 Cyl 5.7 L GAS
View related parts
2006 Dodge Ram 3500 Flywheel Part Number: 52104721AG
$945.88 MSRP: $1440.00
You Save: $494.12 (35%)
ADD TO CART
Product Specifications
- Other Name: Flywheel - Engine Dual Mass; Flywheel Engine Dual Mass
- Replaces: 52104721AD, 52104721AF, 52104721AE, 52104721AC
- Item Weight: 81.00 Pounds
- Item Dimensions: 18.4 x 18.9 x 11.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52104721AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Ram 3500 Submodels:
- Laramie, SLT, ST, SXT, Sport, TRX4 | 5.9L L6, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL

2006 Dodge Ram 3500 Flywheel Parts and Q&A

Q: How to Service and Correctly Install a Flywheel on 2006 Dodge Ram 3500?
A: First, take off the transmission, after which remove the bolts and flexplate 1. For installation, lay the flexplate or flywheel on the crank shaft and tighten the bolts by hand. For automatic transmissions, first tighten the flex plate retaining bolts to 95 Nm (70 ft. lbs.) before fitting the transmission again.