How to Service and Repair a Steering Knuckle on 2006 Dodge Sprinter 2500?

The steering knuckle may be repaired by lifting the vehicle and removing the front wheels. Disassemble the brake caliper, hub/bearing and loosen up the tie rod with tool C-3894-A. Take the strut and the lower ball joint out and replace the knuckle, tightening all the parts and repositioning the toe where necessary.

OEM 2006 Dodge Sprinter 2500 Steering Knuckle

Front Steering Knuckle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Steering Knuckles found

View related parts
2006 Dodge Sprinter 2500 Knuckle, Front Driver Side Part Number: 5135233AA
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front Left; Knuckle Front
- Position: Front Driver Side
- Item Weight: 17.40 Pounds
- Item Dimensions: 10.2 x 10.5 x 10.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5135233AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Sprinter 2500 Submodels:
- Base | 5 Cyl 2.7 L DIESEL
View related parts
2006 Dodge Sprinter 2500 Knuckle, Front Passenger Side Part Number: 5135232AA
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front Right; Knuckle Front
- Position: Front Passenger Side
- Item Weight: 16.60 Pounds
- Item Dimensions: 10.7 x 10.6 x 8.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5135232AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Sprinter 2500 Submodels:
- Base | 5 Cyl 2.7 L DIESEL

2006 Dodge Sprinter 2500 Steering Knuckle Parts and Q&A

Q: How to Service and Repair a Steering Knuckle on 2006 Dodge Sprinter 2500?
A: The steering knuckle may be repaired by lifting the vehicle and removing the front wheels. Disassemble the brake caliper, hub/bearing and loosen up the tie rod with tool C-3894-A. Take the strut and the lower ball joint out and replace the knuckle, tightening all the parts and repositioning the toe where necessary.