How to Service the Blend Door Actuator on 2006 Dodge Sprinter 3500?

You should first disconnect the negative battery cable when servicing the recirculation door actuator. After that, take out the wire harness connector and unplug the vacuum line from the actuator. Unscrew the two bolts holding the actuator to the ventilation housing, disconnect the actuator shaft from its pivot lever on the recirculation door and then remove the actuator from the car. First, attach the actuator shaft to the recirculation door pivot lever and then put the two screws into the ventilation housing, tightening them until they reach 2 N.m (17 in. lbs.). Attach the connector for the suction line and the wire harness to the actuator and then link the battery negative cable.

OEM 2006 Dodge Sprinter 3500 Blend Door Actuator

Air Blend Door Actuator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Blend Door Actuators found

View related parts
2006 Dodge Sprinter 3500 Actuator Part Number: 5133441AA
$70.73 MSRP: $134.00
You Save: $63.27 (48%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator - A/C And Heater; HVAC Air Inlet Door Actuator; HVAC Heater Blend Door Actuator; Actuator A/C And Heater
- Item Weight: 0.70 Pounds
- Item Dimensions: 10.8 x 7.4 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5133441AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Sprinter 3500 Submodels:
- Base | 5 Cyl 2.7 L DIESEL
View related parts
2006 Dodge Sprinter 3500 Lock Actuator, Rear Part Number: 5133998AA
$145.16 MSRP: $184.02
You Save: $38.86 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator - Power Door Lock; Door Lock Actuator Motor, Rear; Actuator; Actuator Power Door Lock; Servo Mode Door; Door Lock Actuator Motor; Door Lock Actuator; Door Lock
- Position: Rear
- Item Weight: 0.90 Pounds
- Item Dimensions: 5.3 x 5.3 x 3.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5133998AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Sprinter 3500 Submodels:
- Base | 5 Cyl 2.7 L DIESEL

2006 Dodge Sprinter 3500 Blend Door Actuator Parts and Q&A

Q: How to Service the Blend Door Actuator on 2006 Dodge Sprinter 3500?
A: You should first disconnect the negative battery cable when servicing the recirculation door actuator. After that, take out the wire harness connector and unplug the vacuum line from the actuator. Unscrew the two bolts holding the actuator to the ventilation housing, disconnect the actuator shaft from its pivot lever on the recirculation door and then remove the actuator from the car. First, attach the actuator shaft to the recirculation door pivot lever and then put the two screws into the ventilation housing, tightening them until they reach 2 N.m (17 in. lbs.). Attach the connector for the suction line and the wire harness to the actuator and then link the battery negative cable.