OEM 2005 Dodge Sprinter 3500 Blend Door Actuator

Air Blend Door Actuator
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Blend Door Actuators found

  • 2005 Dodge Sprinter 3500 Blend Door Actuator Diagram - 5133441AA
    View related parts

    2005 Dodge Sprinter 3500 Actuator Part Number: 5133441AA

    $70.73 MSRP: $134.00
    You Save: $63.27 (48%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Actuator - A/C And Heater; HVAC Air Inlet Door Actuator; HVAC Heater Blend Door Actuator; Actuator A/C And Heater
    • Item Weight: 0.70 Pounds
    • Item Dimensions: 10.8 x 7.4 x 2.9 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5133441AA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2005 Dodge Sprinter 3500 Submodels:
    • Base | 5 Cyl 2.7 L DIESEL
  • 2005 Dodge Sprinter 3500 Blend Door Actuator Diagram - 5133998AA
    View related parts

    2005 Dodge Sprinter 3500 Lock Actuator, Rear Part Number: 5133998AA

    $145.16 MSRP: $184.02
    You Save: $38.86 (22%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Actuator - Power Door Lock; Door Lock Actuator Motor, Rear; Actuator; Actuator Power Door Lock; Servo Mode Door; Door Lock Actuator Motor; Door Lock Actuator; Door Lock
    • Position: Rear
    • Item Weight: 0.90 Pounds
    • Item Dimensions: 5.3 x 5.3 x 3.9 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5133998AA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2005 Dodge Sprinter 3500 Submodels:
    • Base | 5 Cyl 2.7 L DIESEL

2005 Dodge Sprinter 3500 Blend Door Actuator Parts and Q&A

  • Q: How to Service the Blend Door Actuator on 2005 Dodge Sprinter 3500?
    A: Service recirculation door actuator Disconnect battery negative cable followed by the wire harness and the vacuum line. The actuator should be removed by unscrewing and the shaft detached. Installation is the same procedure but this time screws should be tightened to 2 N.m (17 in. lbs.) before putting the battery back.

Related 2005 Dodge Sprinter 3500 Parts