How to Remove and Install a Vapor Canister with an NVLD Pump on 2006 Jeep Commander?

To get the NVLD pump out of the EVAP canister, raise up the vehicle, get the left-rear tire and the splash shield off. The pump has an electrical connector and hoses, disconnect them and remove the canister. For installation, the reverse is done along with ensuring all connections are tight and checking for leaks prior to reassembly.

OEM 2006 Jeep Commander Vapor Canister

Fuel Vapor Canister

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Vapor Canister found

View related parts
2006 Jeep Commander Vapor Canister Part Number: 4891762AA
Product Specifications
- Other Name: Canister - Vapor; Canister Vapor
- Item Weight: 5.10 Pounds
- Item Dimensions: 5.7 x 12.4 x 13.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4891762AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2006 Jeep Commander Vapor Canister Parts and Q&A

Q: How to Remove and Install a Vapor Canister with an NVLD Pump on 2006 Jeep Commander?
A: To get the NVLD pump out of the EVAP canister, raise up the vehicle, get the left-rear tire and the splash shield off. The pump has an electrical connector and hoses, disconnect them and remove the canister. For installation, the reverse is done along with ensuring all connections are tight and checking for leaks prior to reassembly.