How to Service and Repair an Axle Shaft on 2006 Jeep Grand Cherokee?

For repairs or servicing of axle shafts, support the car on a hoist in neutral. After removing the calipers and rotors, knock the end plug loose from the flange with a hammer and punch and remove it. After that, take the speed sensors from the axle tube flange and the axle flange nuts off the axle. Pull the axle shaft and backing plate out of the tube until the bearing is revealed and then unroll the O-ring from the axle bearing. Remove the axle shaft from the tube and the backing plate and, using a hammer and brass drift, tap it from the axle flange and bearing through the hole in the plug. To set up, insert the axle shaft into the axle bearing and flange, then push the axle shaft into the axle tube and backing plate and put a new O-ring on the axle. Guide the O-ring between the backing plate and axle shaft, push the axle inside the bearing and set the O-ring on the bearing. Drop the axle into the needle bearing, attach the axle flange nuts and tighten them to 119 Nm. Insert the sensors into the axle tube flange, then cover the new plug in the axle tube with stud mounting adhesive and use a freeze plug installer to insert it too. In the end, lock the new calipers and rotors in place.

OEM 2006 Jeep Grand Cherokee Axle Shaft

Car Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Axle Shafts found

View related parts
2006 Jeep Grand Cherokee Axle Assembly, Front Driver Side Part Number: 52104591AB
$439.74 MSRP: $668.00
You Save: $228.26 (35%)
ADD TO CART
Product Specifications
- Other Name: Shaft - Axle Half; CV Axle Assembly, Front Left; Constant Velocity Axle; Axle Shaft; Shaft Axle Half; CV Axle Assembly
- Position: Front Driver Side
- Replaces: 52104591AA
- Item Weight: 17.30 Pounds
- Item Dimensions: 31.5 x 8.1 x 8.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52104591AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Grand Cherokee Submodels:
- 65th Anniversary Edition, Laredo, Limited, Overland, SRT8 | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2006 Jeep Grand Cherokee Axle Assembly, Front Passenger Side Part Number: 52104590AA
$436.15 MSRP: $639.00
You Save: $202.85 (32%)
Product Specifications
- Other Name: Shaft - Axle Half; CV Axle Assembly, Front Right; Constant Velocity Axle; Axle Shaft; Shaft Axle Half; CV Axle Assembly
- Position: Front Passenger Side
- Item Weight: 16.90 Pounds
- Item Dimensions: 26.6 x 3.8 x 3.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52104590AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Grand Cherokee Submodels:
- 65th Anniversary Edition, Laredo, Limited, Overland, SRT8 | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2006 Jeep Grand Cherokee Axle Shaft, Rear Driver Side Part Number: 5183529AA
Product Specifications
- Other Name: Shaft - Axle Rear; Drive Axle Shaft, Rear Left; Axle Shafts; Shaft Axle Rear; Shaft Axle
- Position: Rear Driver Side
- Item Weight: 15.30 Pounds
- Item Dimensions: 33.7 x 4.2 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5183529AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Grand Cherokee Submodels:
- 65th Anniversary Edition, Laredo, Limited, Overland, SRT8 | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2006 Jeep Grand Cherokee Axle Shaft, Front Part Number: 52111347AB
Product Specifications
- Other Name: Shaft - Axle; Drive Axle Shaft, Front; Axle Shafts; Shaft Axle
- Position: Front
- Replaces: 52111347AC
- Item Weight: 7.00 Pounds
- Item Dimensions: 24.2 x 4.1 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52111347AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Grand Cherokee Submodels:
- 65th Anniversary Edition, Laredo, Limited, Overland, SRT8 | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2006 Jeep Grand Cherokee Axle Shaft, Rear Passenger Side Part Number: 5183528AA
Product Specifications
- Other Name: Shaft - Axle Rear; Drive Axle Shaft, Rear Right; Axle Shafts; Shaft Axle Rear; Shaft Axle
- Position: Rear Passenger Side
- Item Weight: 14.00 Pounds
- Item Dimensions: 33.3 x 3.7 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5183528AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Grand Cherokee Submodels:
- 65th Anniversary Edition, Laredo, Limited, Overland, SRT8 | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2006 Jeep Grand Cherokee Axle Assembly, Front Driver Side Part Number: 52104701AB
Product Specifications
- Other Name: Shaft - Axle Half; CV Axle Assembly, Front Left; Constant Velocity Axle; Axle Shaft; Shaft Axle Half; CV Axle Assembly
- Position: Front Driver Side
- Replaces: RL104701AB
- Item Weight: 18.60 Pounds
- Item Dimensions: 40.4 x 6.2 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52104701AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Grand Cherokee Submodels:
- 65th Anniversary Edition, Laredo, Limited, Overland, SRT8 | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2006 Jeep Grand Cherokee Axle Shaft, Rear Driver Side Part Number: 52111913AA
Product Specifications
- Other Name: Shaft - Axle Rear; Drive Axle Shaft, Rear Left, Rear Right; Axle Shafts; Shaft Axle Rear; Shaft Axle
- Position: Rear Driver Side
- Item Weight: 13.60 Pounds
- Item Dimensions: 37.9 x 15.8 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52111913AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Grand Cherokee Submodels:
- 65th Anniversary Edition, Laredo, Limited, Overland, SRT8 | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2006 Jeep Grand Cherokee Axle Shaft, Rear Driver Side Part Number: 52114077AA
Product Specifications
- Other Name: Shaft - Axle Rear; Drive Axle Shaft, Rear Left, Rear Right; Axle Shafts; Shaft Axle Rear; Shaft Axle
- Position: Rear Driver Side
- Item Weight: 13.10 Pounds
- Item Dimensions: 35.7 x 6.3 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52114077AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Grand Cherokee Submodels:
- 65th Anniversary Edition, Laredo, Limited, Overland, SRT8 | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2006 Jeep Grand Cherokee Axle Shaft, Front Part Number: 52111969AC
Product Specifications
- Other Name: Shaft - Axle; Drive Axle Shaft, Front; Axle Shafts; Shaft Axle
- Position: Front
- Replaces: 52111969AB, 52111969AD
- Item Weight: 6.40 Pounds
- Item Dimensions: 19.8 x 4.2 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52111969AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Grand Cherokee Submodels:
- 65th Anniversary Edition, Laredo, Limited, Overland, SRT8 | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2006 Jeep Grand Cherokee Axle Shaft, Rear Driver Side Part Number: 52111899AA
Product Specifications
- Other Name: Shaft - Axle Rear; Drive Axle Shaft, Rear Left, Rear Right; Axle Shafts; Shaft Axle Rear; Shaft Axle
- Position: Rear Driver Side
- Item Weight: 12.90 Pounds
- Item Dimensions: 37.1 x 4.2 x 0.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52111899AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Grand Cherokee Submodels:
- 65th Anniversary Edition, Laredo, Limited, Overland, SRT8 | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2006 Jeep Grand Cherokee Axle Shaft, Rear Driver Side Part Number: 52114076AA
Product Specifications
- Other Name: Shaft - Axle Rear; Drive Axle Shaft, Rear Left, Rear Right; Axle Shafts; Shaft Axle Rear; Shaft Axle
- Position: Rear Driver Side
- Item Weight: 14.00 Pounds
- Item Dimensions: 39.9 x 5.1 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52114076AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Grand Cherokee Submodels:
- 65th Anniversary Edition, Laredo, Limited, Overland, SRT8 | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

2006 Jeep Grand Cherokee Axle Shaft Parts and Q&A

Q: How to Service and Repair an Axle Shaft on 2006 Jeep Grand Cherokee?
A: For repairs or servicing of axle shafts, support the car on a hoist in neutral. After removing the calipers and rotors, knock the end plug loose from the flange with a hammer and punch and remove it. After that, take the speed sensors from the axle tube flange and the axle flange nuts off the axle. Pull the axle shaft and backing plate out of the tube until the bearing is revealed and then unroll the O-ring from the axle bearing. Remove the axle shaft from the tube and the backing plate and, using a hammer and brass drift, tap it from the axle flange and bearing through the hole in the plug. To set up, insert the axle shaft into the axle bearing and flange, then push the axle shaft into the axle tube and backing plate and put a new O-ring on the axle. Guide the O-ring between the backing plate and axle shaft, push the axle inside the bearing and set the O-ring on the bearing. Drop the axle into the needle bearing, attach the axle flange nuts and tighten them to 119 Nm. Insert the sensors into the axle tube flange, then cover the new plug in the axle tube with stud mounting adhesive and use a freeze plug installer to insert it too. In the end, lock the new calipers and rotors in place.