How to Service and Repair the Drive Shaft on 2006 Jeep Grand Cherokee?

When servicing or repairing, first change the propeller shaft slip joint boot if needed and be sure to mark both parts of the shaft so they line up correctly. After putting the vehicle on a hoist in neutral, mark the propeller shaft, pinion flange and transmission/transfer case flanges so you know where to install them. Take the propeller shaft off the inside of the vehicle by removing it from the axle pinion flange and then from the transfer case or transmission flange on the vehicle frame. Check the propeller shaft boot for any damage before installing. If it is not in good condition, change it. Put the propeller shaft into the transfer case or transmission, match the reference marks and fasten it with flange bolts that are tightened to 108 Nm (80 ft. lbs.). After that, install the propeller shaft onto the pinion flange, check the reference marks are matching and fix the flange bolts firmly with a torque measure of 108 Nm (80 ft. lbs.). It is very important to follow these directions to prevent the driving line from vibrating.

OEM 2006 Jeep Grand Cherokee Drive Shaft

Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Drive Shafts found

View related parts
2006 Jeep Grand Cherokee Drive Shaft Part Number: 52853004AF
$914.21 MSRP: $1410.00
You Save: $495.79 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive Rear 1-Piece
- Replaces: 52853004AE, 52853004AC, 52853004AD
- Item Weight: 23.10 Pounds
- Item Dimensions: 53.0 x 8.4 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52853004AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Grand Cherokee Submodels:
- 65th Anniversary Edition, Laredo, Limited, SRT8 | 3.7L V6, 6 Cyl 3.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2006 Jeep Grand Cherokee Drive Shaft Part Number: 52105728AE
$1230.88 MSRP: $1815.00
You Save: $584.12 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft - Drive; Driveshaft
- Replaces: 52105728AD
- Item Weight: 19.30 Pounds
- Item Dimensions: 41.3 x 6.9 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52105728AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Grand Cherokee Submodels:
- 65th Anniversary Edition, Laredo, Limited, Overland, SRT8 | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2006 Jeep Grand Cherokee Drive Shaft Part Number: 52105758AE
$1683.07 MSRP: $2270.00
You Save: $586.93 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft - Drive; Driveshaft
- Replaces: 52105758AD
- Item Weight: 20.30 Pounds
- Item Dimensions: 5.6 x 5.8 x 39.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52105758AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Grand Cherokee Submodels:
- 65th Anniversary Edition, Laredo, Limited, Overland, SRT8 | 3.7L V6, 6 Cyl 3.7 L GAS, 6.1L V8, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2006 Jeep Grand Cherokee Drive Shaft Part Number: 52853003AF
$1610.74 MSRP: $2200.00
You Save: $589.26 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive Rear 1-Piece
- Replaces: 52853003AE, 52853003AD, 52853003AC
- Item Weight: 19.60 Pounds
- Item Dimensions: 54.9 x 10.3 x 9.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52853003AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Grand Cherokee Submodels:
- Laredo, Limited, Overland, SRT8 | 6 Cyl 3.0 L DIESEL, 6.1L V8, 8 Cyl 6.1 L GAS
View related parts
2006 Jeep Grand Cherokee Drive Shaft Part Number: 52105760AF
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive Rear 1-Piece
- Replaces: 52105760AE, RL105760AF, 52105760AD, 52105760AC
- Item Weight: 18.70 Pounds
- Item Dimensions: 46.2 x 8.2 x 7.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52105760AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Grand Cherokee Submodels:
- 65th Anniversary Edition, Laredo, Limited, Overland, SRT8 | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2006 Jeep Grand Cherokee Drive Shaft Part Number: 52105726AF
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive Rear 1-Piece
- Replaces: 52105726AD, 52105726AE, 52105726AC
- Item Weight: 21.10 Pounds
- Item Dimensions: 54.1 x 11.2 x 9.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52105726AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Grand Cherokee Submodels:
- 65th Anniversary Edition, Laredo, Limited, Overland | 4.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2006 Jeep Grand Cherokee Drive Shaft Part Number: 52853006AF
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive Rear 1-Piece
- Replaces: 52853006AC, 52853006AE, 52853006AD
- Item Weight: 20.30 Pounds
- Item Dimensions: 21.2 x 10.0 x 9.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52853006AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Grand Cherokee Submodels:
- 65th Anniversary Edition, Laredo, Limited, Overland, SRT8 | 3.7L V6, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

2006 Jeep Grand Cherokee Drive Shaft Parts and Q&A

Q: How to Service and Repair the Drive Shaft on 2006 Jeep Grand Cherokee?
A: When servicing or repairing, first change the propeller shaft slip joint boot if needed and be sure to mark both parts of the shaft so they line up correctly. After putting the vehicle on a hoist in neutral, mark the propeller shaft, pinion flange and transmission/transfer case flanges so you know where to install them. Take the propeller shaft off the inside of the vehicle by removing it from the axle pinion flange and then from the transfer case or transmission flange on the vehicle frame. Check the propeller shaft boot for any damage before installing. If it is not in good condition, change it. Put the propeller shaft into the transfer case or transmission, match the reference marks and fasten it with flange bolts that are tightened to 108 Nm (80 ft. lbs.). After that, install the propeller shaft onto the pinion flange, check the reference marks are matching and fix the flange bolts firmly with a torque measure of 108 Nm (80 ft. lbs.). It is very important to follow these directions to prevent the driving line from vibrating.