Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2006 Jeep Wrangler Release Bearing

Clutch Release Throw Out Bearing
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Release Bearing found

  • 2006 Jeep Wrangler Release Bearing - 53008342
    2006 Jeep Wrangler Release Bearing - 53008342
    2006 Jeep Wrangler Release Bearing - 53008342
    2006 Jeep Wrangler Release Bearing - 53008342
    2006 Jeep Wrangler Release Bearing Diagram - 53008342
    View related parts

    2006 Jeep Wrangler Release Bearing Part Number: 53008342

    $153.85 MSRP: $231.00
    You Save: $77.15 (34%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Bearing - Clutch Release; Clutch Release Bearings; Clutch Release Bearing; Clutch Kit; Bearing Assembly, With Sleeve, Clutch Release 1990-91; For 3.9 L, 5.2 L, 5.9 L Engines.
    • Replaces: 53008342AB
    • Item Weight: 1.50 Pounds
    • Item Dimensions: 3.2 x 4.9 x 5.3 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 53008342
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2006 Jeep Wrangler Submodels:
    • 65th Anniversary Edition, 70th Anniversary, 75th Anniversary, Renegade, Rio Grande, Rubicon, S, SE, Sahara, Sport, Sport S, Unlimited, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X, X, X-S | 2.4L L4, 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 4.0L L6, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2006 Jeep Wrangler Release Bearing Parts and Q&A

  • Q: How to Service and Repair a Release Bearing on 2006 Jeep Wrangler?
    A: Before tackling clutch release bearing service or repair, first remove the transmission. Next, take the release bearing off from the release lever and disconnect them both. If the transmission front bearing retainer's bearing slide surface has any cracks, wear or scoring marks, remove and replace the retainer. Confirm that the fork pivot is secure and in great shape and check that the fork is not bent, damaged or worn; replace the release fork spring if it is dented or twisted. Use a thin coating of high temperature bearing grease or something similar, to grease the crankshaft pilot bearing, input shaft splines, bearing retainer slide surface, fork pivot and release fork pivot surface before installation. Install the new release bearing on the release fork and properly secure it and only then re-install the transmission.

Related 2006 Jeep Wrangler Parts

Alternate Year Models

+
2005 Jeep Wrangler Release Bearing 2007 Jeep Wrangler Release Bearing