How to install a Release Bearing on 2007 Jeep Wrangler?

Before putting in the clutch release bearing, spread some Mopar high temperature bearing grease or a similar product on the end of a long shank, small diameter flat blade screwdriver to reach the crankshaft pilot bearing that fits in the clutch disc hub. After that, apply lube to the input shaft splines, bearing retainer slide, fork pivot and release fork pivot. After that, install release 1 onto the release fork and fix it in place before adding the transmission.

OEM 2007 Jeep Wrangler Release Bearing

Clutch Release Throw Out Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Release Bearing found

View related parts
2007 Jeep Wrangler Release Bearing Part Number: 53008342
$153.85 MSRP: $231.00
You Save: $77.15 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing - Clutch Release; Clutch Release Bearings; Clutch Release Bearing; Clutch Kit; Bearing Assembly, With Sleeve, Clutch Release 1990-91; For 3.9 L, 5.2 L, 5.9 L Engines.
- Replaces: 53008342AB
- Item Weight: 1.50 Pounds
- Item Dimensions: 3.2 x 4.9 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53008342
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Wrangler Submodels:
- 65th Anniversary Edition, 70th Anniversary, 75th Anniversary, Renegade, Rio Grande, Rubicon, S, SE, Sahara, Sport, Sport S, Unlimited, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X, X, X-S | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2007 Jeep Wrangler Release Bearing Parts and Q&A

Q: How to install a Release Bearing on 2007 Jeep Wrangler?
A: Before putting in the clutch release bearing, spread some Mopar high temperature bearing grease or a similar product on the end of a long shank, small diameter flat blade screwdriver to reach the crankshaft pilot bearing that fits in the clutch disc hub. After that, apply lube to the input shaft splines, bearing retainer slide, fork pivot and release fork pivot. After that, install release 1 onto the release fork and fix it in place before adding the transmission.