How to Remove and Install a Vapor Canister Along with the NVLD Pump and Filter on 2006 Jeep Wrangler?

The right/rear side of the vehicle includes a special support bracket holding the Natural Vehicle Leak Detection (NVLD) pump, pump filter and EVAP canister, located beneath the plastic wheelhouse liner. You will have to remove the EVAP canister the same way you would the NVLD pump. Mount the NVLD pump, pump filter and EVAP canister to the strut bracket so that they are in the same place.

OEM 2006 Jeep Wrangler Vapor Canister

Fuel Vapor Canister

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Vapor Canister found

View related parts
2006 Jeep Wrangler Vapor Canister Part Number: 52059630AB
$243.10 MSRP: $371.00
You Save: $127.90 (35%)
ADD TO CART
Product Specifications
- Other Name: Canister - Vapor; Canister Vapor
- Item Weight: 5.10 Pounds
- Item Dimensions: 15.8 x 10.9 x 6.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52059630AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Wrangler Submodels:
- 65th Anniversary Edition, Rubicon, SE, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 6 Cyl 4.0 L GAS

2006 Jeep Wrangler Vapor Canister Parts and Q&A

Q: How to Remove and Install a Vapor Canister Along with the NVLD Pump and Filter on 2006 Jeep Wrangler?
A: The right/rear side of the vehicle includes a special support bracket holding the Natural Vehicle Leak Detection (NVLD) pump, pump filter and EVAP canister, located beneath the plastic wheelhouse liner. You will have to remove the EVAP canister the same way you would the NVLD pump. Mount the NVLD pump, pump filter and EVAP canister to the strut bracket so that they are in the same place.