How to Locate, Remove, and Install a Canister Purge Valve on 2006 Jeep Wrangler?

In the engine compartment, the duty cycle EVAP canister purge valve sits next to the front of the brake master cylinder and is bracketed by a slip-on bracket. Nearby is the EVAP System Test Port. Before you can take out the valve, remove the electric wiring connector and then unhook the vacuum hoses or lines. After that, remove the valve and its rubber support from the bracket. Next, place the rubber support and purge valve on the router and join them with its mounting bracket. Also, connect the vacuum harness and the wiring connector.

OEM 2006 Jeep Wrangler Canister Purge Valve

Vapor Canister Purge Valve EVAP

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Canister Purge Valve found

View related parts
2006 Jeep Wrangler Purge Valve Part Number: 4669940AB
$66.39 MSRP: $97.80
You Save: $31.41 (33%)
Product Specifications
- Other Name: Solenoid - Proportional Purge; Vapor Canister Purge Solenoid; Vapor Canister Vent Solenoid; Canister Purge Valve; Purge Solenoid; Solenoid; Solenoid Proportional Purge
- Item Weight: 1.10 Pounds
- Item Dimensions: 3.3 x 4.8 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4669940AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Wrangler Submodels:
- 65th Anniversary Edition, Rubicon, SE, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 6 Cyl 4.0 L GAS

2006 Jeep Wrangler Canister Purge Valve Parts and Q&A

Q: How to Locate, Remove, and Install a Canister Purge Valve on 2006 Jeep Wrangler?
A: In the engine compartment, the duty cycle EVAP canister purge valve sits next to the front of the brake master cylinder and is bracketed by a slip-on bracket. Nearby is the EVAP System Test Port. Before you can take out the valve, remove the electric wiring connector and then unhook the vacuum hoses or lines. After that, remove the valve and its rubber support from the bracket. Next, place the rubber support and purge valve on the router and join them with its mounting bracket. Also, connect the vacuum harness and the wiring connector.