How is a Muffler Installed on 2007 Chrysler Aspen?

The band clamps are not reusable so it is necessary to replace them during installation of the muffler. First, lock the muffler in place on the catalytic converter or exhaust tube, making certain the tang seats tightly into the tang location. Next I install new exhaust clamps without tightening them at the moment yet. Then proceed to install the muffler isolators; be sure they are not stretched, with a minimum of 1.65 in. (42 mm) between the hanger rods. Hold the muffler in alignment over the exhaust pipe and tighten the exhaust clamp nuts to 61 Nm (45 ft. lbs.) After install ensure exhaust system maintains clear of body panels and make any necessary adjustments. The last step is to finally lower the vehicle, start the engine and check for exhaust leaks, fixing this if necessary.

OEM 2007 Chrysler Aspen Muffler

Exhaust Muffler

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Mufflers found

View related parts
2007 Chrysler Aspen Rear Muffler Part Number: 68027036AA
$278.75 MSRP: $427.00
You Save: $148.25 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Muffler - Exhaust; Exhaust Muffler; Direct-Fit Exhaust; Exhaust System Kit; Resonator; Muffler
- Replaces: 52103712AF, 52103712AD, 52103712AE
- Item Weight: 9.10 Pounds
- Item Dimensions: 53.0 x 14.0 x 8.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68027036AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler Aspen Submodels:
- Limited | 4.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2007 Chrysler Aspen Front Muffler Part Number: 52855524AB
Product Specifications
- Other Name: Muffler - Exhaust; Exhaust Muffler; Exhaust Muffler Assembly; Resonator; Muffler; Muffler Exhaust
- Replaces: 52855524AA
- Item Weight: 37.50 Pounds
- Item Dimensions: 26.3 x 12.5 x 11.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52855524AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler Aspen Submodels:
- Limited | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2007 Chrysler Aspen Muffler Parts and Q&A

Q: How is a Muffler Installed on 2007 Chrysler Aspen?
A: The band clamps are not reusable so it is necessary to replace them during installation of the muffler. First, lock the muffler in place on the catalytic converter or exhaust tube, making certain the tang seats tightly into the tang location. Next I install new exhaust clamps without tightening them at the moment yet. Then proceed to install the muffler isolators; be sure they are not stretched, with a minimum of 1.65 in. (42 mm) between the hanger rods. Hold the muffler in alignment over the exhaust pipe and tighten the exhaust clamp nuts to 61 Nm (45 ft. lbs.) After install ensure exhaust system maintains clear of body panels and make any necessary adjustments. The last step is to finally lower the vehicle, start the engine and check for exhaust leaks, fixing this if necessary.