How to Install a Dipstick Tube for Engine Oil on 2007 Chrysler Crossfire?

Before installing the engine oil dip stick tube, change the oil level indicator tube's seal, add engine oil to it and push the tube into the dip stick hole so no oil leaks. After that, place the oil level indicator and install it in the crankcase. Mount the bolt into the cylinder head cover and tighten it until it reaches 10 Nm (89 in. lbs.). After that, place the wire harness loom alongside the oil level indicator tube and tie it in place with a new cable tie. Install the filter housing, start the motor and look for leaks around it.

OEM 2007 Chrysler Crossfire Dipstick Tube

Oil Dipstick Tube

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Dipstick Tube found

View related parts
2007 Chrysler Crossfire Tube Part Number: 5099318AA
$10.59 MSRP: $13.42
You Save: $2.83 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube - Engine Oil Indicator; Engine Oil Dipstick Tube; Tube Engine Oil Indicator; Oil Dipstick Tube
- Item Weight: 0.90 Pounds
- Item Dimensions: 22.7 x 5.8 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5099318AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS

2007 Chrysler Crossfire Dipstick Tube Parts and Q&A

Q: How to Install a Dipstick Tube for Engine Oil on 2007 Chrysler Crossfire?
A: Before installing the engine oil dip stick tube, change the oil level indicator tube's seal, add engine oil to it and push the tube into the dip stick hole so no oil leaks. After that, place the oil level indicator and install it in the crankcase. Mount the bolt into the cylinder head cover and tighten it until it reaches 10 Nm (89 in. lbs.). After that, place the wire harness loom alongside the oil level indicator tube and tie it in place with a new cable tie. Install the filter housing, start the motor and look for leaks around it.