How to Effectively Maintain and Repair a Hydraulic Hose on 2007 Chrysler Crossfire?

Repairing Hydraulic hose requires that the lower driver side instrument panel and illumination control module are removed without touching brake fluid. Clamp the supply hose of the masterclutch cylinder, disconnect and seal the pressure line. Lastly, pull out the clutch pedal spring, circlip, and retaining nuts and then turn the clutch master cylinder counter-clockwise to digitise it.

OEM 2007 Chrysler Crossfire Hydraulic Hose

Brake Hydraulic Line

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Hydraulic Hoses found

View related parts
2007 Chrysler Crossfire Flex Hose, Front Part Number: 5134451AA
Product Specifications
- Other Name: Line - Brake; Brake Hydraulic Hose, Front; Hydraulic Hose; Brake Hose; Brake Line
- Position: Front
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5134451AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2007 Chrysler Crossfire Submodels:
- Base, Limited | 6 Cyl 3.2 L GAS
View related parts
2007 Chrysler Crossfire Flex Hose, Front Part Number: 68064313AA
Product Specifications
- Other Name: Line - Brake; Brake Hydraulic Hose, Front, Rear; Hydraulic Hose; Brake Hose; Brake Line
- Position: Front
- Replaces: 5099183AA, 68025215AA
- Item Weight: 0.60 Pounds
- Item Dimensions: 17.2 x 0.5 x 0.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68064313AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 3.2L V6, 6 Cyl 3.2 L GAS

2007 Chrysler Crossfire Hydraulic Hose Parts and Q&A

Q: How to Effectively Maintain and Repair a Hydraulic Hose on 2007 Chrysler Crossfire?
A: Repairing Hydraulic hose requires that the lower driver side instrument panel and illumination control module are removed without touching brake fluid. Clamp the supply hose of the masterclutch cylinder, disconnect and seal the pressure line. Lastly, pull out the clutch pedal spring, circlip, and retaining nuts and then turn the clutch master cylinder counter-clockwise to digitise it.