Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2007 Chrysler Crossfire ABS Control Module

Anti Lock Brake Control Module
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 ABS Control Modules found

  • 2007 Chrysler Crossfire ABS Control Module - 5161126AB
    2007 Chrysler Crossfire ABS Control Module - 5161126AB
    2007 Chrysler Crossfire ABS Control Module Diagram - 5161126AB
    View related parts

    2007 Chrysler Crossfire Modulator Valve Part Number: 5161126AB

    Product Specifications
    • Other Name: Control - Anti-Lock Brake System; ABS Hydraulic Assembly; ABS Control Module; ABS Control Unit; Hydraulic Control Unit Anti-Lock Brake System
    • Item Weight: 7.50 Pounds
    • Item Dimensions: 12.2 x 7.9 x 7.1 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5161126AB
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2007 Chrysler Crossfire Submodels:
    • Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
  • 2007 Chrysler Crossfire ABS Control Module - 5161125AB
    2007 Chrysler Crossfire ABS Control Module - 5161125AB
    2007 Chrysler Crossfire ABS Control Module Diagram - 5161125AB
    View related parts

    2007 Chrysler Crossfire Control Module Part Number: 5161125AB

    Product Specifications
    • Other Name: Control - Anti-Lock Brake; ABS Control Module; Control Unit Anti-Lock Brake
    • Replaces: 5135427AA, 5161125AA
    • Item Weight: 2.50 Pounds
    • Item Dimensions: 10.3 x 8.0 x 5.9 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5161125AB
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2007 Chrysler Crossfire Submodels:
    • Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS

2007 Chrysler Crossfire ABS Control Module Parts and Q&A

  • Q: How to Remove the ABS Control Module on 2007 Chrysler Crossfire?
    A: The first step to remove the Electronic Brake Control Module is to disconnect the negative battery cable and wipe the top of the Hydraulic Control Unit close to the hydraulic lines. Before beginning to disconnect, mark each hydraulic brake line and its related connection on the HCU so it's easier to put them back together. Following this, pull out the hydraulic lines 1-6 from the HCU and close each hydraulic connection and line with a plug. Unextend the first harness of the Controller Antilock Brake (CAB) and then remove the two retaining screws from the Integrated Control Unit (ICU) retaining bracket. Simultaneously raise the ICU and gently move the hydraulic brake lines to one side. Carve off the excess solder from the section of the board where the CAB meets the HCU and then extract the four retaining screws.

Related 2007 Chrysler Crossfire Parts

Alternate Year Models

+
2006 Chrysler Crossfire ABS Control Module 2008 Chrysler Crossfire ABS Control Module