Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2007 Chrysler Crossfire Parking Brake Cable

Emergency Parking Brake Release Cable
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Parking Brake Cables found

  • 2007 Chrysler Crossfire Parking Brake Cable - 5098986AA
    2007 Chrysler Crossfire Parking Brake Cable Diagram - 5098986AA
    View related parts

    2007 Chrysler Crossfire Rear Cable Part Number: 5098986AA

    $35.44 MSRP: $44.93
    You Save: $9.49 (22%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Cable - Parking Brake; Brake Cable; Cable Parking Brake
    • Item Weight: 1.20 Pounds
    • Item Dimensions: 41.2 x 2.2 x 1.0 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5098986AA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2007 Chrysler Crossfire Submodels:
    • Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
  • 2007 Chrysler Crossfire Parking Brake Cable - 5098987AA
    2007 Chrysler Crossfire Parking Brake Cable Diagram - 5098987AA
    View related parts

    2007 Chrysler Crossfire Rear Cable Part Number: 5098987AA

    $52.86 MSRP: $67.01
    You Save: $14.15 (22%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Cable - Parking Brake; Brake Cable; Cable Parking Brake
    • Item Weight: 1.00 Pounds
    • Item Dimensions: 41.9 x 1.9 x 2.0 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5098987AA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2007 Chrysler Crossfire Submodels:
    • Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS

2007 Chrysler Crossfire Parking Brake Cable Parts and Q&A

  • Q: How to Effectively Service and Repair a Parking Brake Cable on 2007 Chrysler Crossfire?
    A: First, raise and support your car, then use a jack and a jack stand to take out the wheel and tire. After that, unscrew the rear caliper assembly bolts and remove the rear brake rotor. Pull out the parking brake shoe assembly and now loosen the bolt on the parking brake cable equalizer tensioner. Remove the bolt holding the front parking brake cable to the parking brake cable equalizer and take the cable and the parking brake cable from the equalizer. Detach the parking brake shoe actuator arm by pulling back on it from the rear wheel carrier, then open the top cover of the arm to see the parking brake cable pin. Insert the cable pin into the slot on the arm to remove the actuator from the pulley tube. Ultimately, disconnect the parking brake cable from the rear wheel carrier by removing its bolt and pull it from the eyelets all the way out of the car.

Related 2007 Chrysler Crossfire Parts

Alternate Year Models

+
2006 Chrysler Crossfire Parking Brake Cable 2008 Chrysler Crossfire Parking Brake Cable