How to Replace a Brake Caliper on the Rear Disc on 2007 Chrysler Crossfire?

Put the rear brake pads in before you replace the brake caliper. After that, hold the brake hose with a line wrench and spin the caliper to tighten it, checking it does not twist or kink before connecting it to the knuckle. Attach the caliper to the knuckle by using the bolts provided and fasten them at 55 Nm (41 ft. lbs.). Then, bleed the brake system, assemble the wheel and tire and install it. You should not move the vehicle until you are sure the vehicle is stopped. After lowering the car, press the brake pedal until you feel the caliper pistons and brake pads seated. If needed, replace any old brake fluid by pouring new fluid into the reservoir and spot-check for leaks.

OEM 2007 Chrysler Crossfire Brake Caliper

Caliper

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Brake Calipers found

View related parts
2007 Chrysler Crossfire Caliper, Rear Driver Side Part Number: 5126303AA
$67.99 MSRP: $86.18
You Save: $18.19 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Rear Left; Caliper Disc Brake; Brake Caliper
- Position: Rear Driver Side
- Item Weight: 3.20 Pounds
- Item Dimensions: 7.4 x 6.5 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5126303AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler Crossfire Submodels:
- Base, Limited | 6 Cyl 3.2 L GAS
View related parts
2007 Chrysler Crossfire Caliper, Front Driver Side Part Number: 5139587AA
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Front Left; Caliper Disc Brake; Brake Caliper
- Position: Front Driver Side
- Item Weight: 9.20 Pounds
- Item Dimensions: 8.3 x 7.0 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5139587AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler Crossfire Submodels:
- Base, Limited | 6 Cyl 3.2 L GAS
View related parts
2007 Chrysler Crossfire Caliper, Front Passenger Side Part Number: 5139586AA
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Front Right; Caliper Disc Brake; Brake Caliper
- Position: Front Passenger Side
- Item Weight: 8.90 Pounds
- Item Dimensions: 8.4 x 6.7 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5139586AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler Crossfire Submodels:
- Base, Limited | 6 Cyl 3.2 L GAS
View related parts
2007 Chrysler Crossfire Caliper, Rear Passenger Side Part Number: 5126302AA
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Rear Right; Caliper Disc Brake; Brake Caliper
- Position: Rear Passenger Side
- Item Weight: 6.60 Pounds
- Item Dimensions: 7.7 x 6.8 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5126302AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler Crossfire Submodels:
- Base, Limited | 6 Cyl 3.2 L GAS

2007 Chrysler Crossfire Brake Caliper Parts and Q&A

Q: How to Replace a Brake Caliper on the Rear Disc on 2007 Chrysler Crossfire?
A: Put the rear brake pads in before you replace the brake caliper. After that, hold the brake hose with a line wrench and spin the caliper to tighten it, checking it does not twist or kink before connecting it to the knuckle. Attach the caliper to the knuckle by using the bolts provided and fasten them at 55 Nm (41 ft. lbs.). Then, bleed the brake system, assemble the wheel and tire and install it. You should not move the vehicle until you are sure the vehicle is stopped. After lowering the car, press the brake pedal until you feel the caliper pistons and brake pads seated. If needed, replace any old brake fluid by pouring new fluid into the reservoir and spot-check for leaks.