How to Remove and Replace a Power Steering Pump on 2007 Chrysler Crossfire?

Remove the accessory drive belt, to remove and replace the power steering pump. Then drain the oil from the power steering reservoir, remove the power steering supply line from the reservoir. Then disconnect the return hose from the power steering pump and take off the high pressure hose from the pump. After removing the two bolts that hold it to the engine block the power steering pump can be removed. Press out the C-clip using a suitable tool, if necessary and then remove the reservoir.

OEM 2007 Chrysler Crossfire Power Steering Pump

Power Steering Pump Unit

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Power Steering Pump found

View related parts
2007 Chrysler Crossfire Power Steering Pump Part Number: 5097049AA
Product Specifications
- Other Name: Pump - Power Steering; Pump Power Steering
- Replaces: 5097051AA
- Item Weight: 5.30 Pounds
- Item Dimensions: 8.0 x 6.4 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5097049AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 3.2L V6, 6 Cyl 3.2 L GAS

2007 Chrysler Crossfire Power Steering Pump Parts and Q&A

Q: How to Remove and Replace a Power Steering Pump on 2007 Chrysler Crossfire?
A: Remove the accessory drive belt, to remove and replace the power steering pump. Then drain the oil from the power steering reservoir, remove the power steering supply line from the reservoir. Then disconnect the return hose from the power steering pump and take off the high pressure hose from the pump. After removing the two bolts that hold it to the engine block the power steering pump can be removed. Press out the C-clip using a suitable tool, if necessary and then remove the reservoir.