How to Remove and Service the Right Front Wheelhouse Splash Shield on 2008 Chrysler Crossfire?

First, you need to take out the right front tire and its wheel to service the front fender liner. Subsequently, take out the five plastic retainer nuts as well as the five retainer screws fastening the wheelhouse splash shield. After that, take out the retaining screws that are under the rocker panel on the lower side. Lastly, take the splash shield off the body of the vehicle.

OEM 2008 Chrysler Crossfire Wheelhouse

Outer Wheelhouse

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Wheelhouses found

View related parts
2008 Chrysler Crossfire Fender Liner Part Number: 5098682AA
Product Specifications
- Other Name: Shield - Wheel House; Fender Splash Shield; Shield Wheel House Front Assembly
- Item Weight: 1.40 Pounds
- Item Dimensions: 20.5 x 15.4 x 12.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5098682AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
2008 Chrysler Crossfire Fender Liner Part Number: 5098681AA
Product Specifications
- Other Name: Shield - Wheel House; Fender Splash Shield; Shield Wheel House Front Assembly
- Item Weight: 1.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5098681AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2008 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS

2008 Chrysler Crossfire Wheelhouse Parts and Q&A

Q: How to Remove and Service the Right Front Wheelhouse Splash Shield on 2008 Chrysler Crossfire?
A: First, you need to take out the right front tire and its wheel to service the front fender liner. Subsequently, take out the five plastic retainer nuts as well as the five retainer screws fastening the wheelhouse splash shield. After that, take out the retaining screws that are under the rocker panel on the lower side. Lastly, take the splash shield off the body of the vehicle.