How to Install a Wiper Arm on 2007 Chrysler Crossfire?

Installation of the wiper arm involves putting it over the pivot shaft and tightening the attachment nut by finger. Slide the arm until it reaches the dot matrix, i.e., the blade has to be in contact with the glass. Tighten the nut to 19 Nm and then place the cap on it and finally close the hood.

OEM 2007 Chrysler Crossfire Wiper Arm

Windshield Wiper Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Wiper Arms found

View related parts
2007 Chrysler Crossfire Wiper Arm, Passenger Side Part Number: 5098617AA
Product Specifications
- Other Name: Arm Wiper - Wiper; Windshield Wiper Arm, Right; Arm Wiper
- Position: Passenger Side
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5098617AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2007 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
2007 Chrysler Crossfire Wiper Motor Part Number: 5097935AA
Product Specifications
- Other Name: Motor - Windshield Wiper; Windshield Wiper Motor; Motor Windshield Wiper
- Item Weight: 4.00 Pounds
- Item Dimensions: 10.2 x 5.4 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5097935AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
2007 Chrysler Crossfire Wiper Arm, Driver Side Part Number: 5104752AA
Product Specifications
- Other Name: Arm Wiper - Wiper; Windshield Wiper Arm, Left; Arm Wiper
- Position: Driver Side
- Item Weight: 0.90 Pounds
- Item Dimensions: 17.6 x 3.2 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5104752AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS

2007 Chrysler Crossfire Wiper Arm Parts and Q&A

Q: How to Install a Wiper Arm on 2007 Chrysler Crossfire?
A: Installation of the wiper arm involves putting it over the pivot shaft and tightening the attachment nut by finger. Slide the arm until it reaches the dot matrix, i.e., the blade has to be in contact with the glass. Tighten the nut to 19 Nm and then place the cap on it and finally close the hood.