How to Safely Remove and Service a Wiper Motor on 2007 Chrysler Crossfire?

Start by shutting off the wiper motor with the negative battery cable, then remove the wiper module from beneath the vehicle. After that, unscrew the nut holding the crank arm onto the wiper motor shaft. Put marks on the wiper module and crank arm to ensure they are lined up when you put the bike back together. After that, lift the crank arm off the wiper motor shaft. Remove the three retaining bolts of the wiper motor after that and lastly, pull the wiper motor out from the module.

OEM 2007 Chrysler Crossfire Wiper Motor

Windshield Wiper Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Wiper Motor found

View related parts
2007 Chrysler Crossfire Wiper Motor Part Number: 5097935AA
Product Specifications
- Other Name: Motor - Windshield Wiper; Windshield Wiper Motor; Motor Windshield Wiper
- Item Weight: 4.00 Pounds
- Item Dimensions: 10.2 x 5.4 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5097935AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS

2007 Chrysler Crossfire Wiper Motor Parts and Q&A

Q: How to Safely Remove and Service a Wiper Motor on 2007 Chrysler Crossfire?
A: Start by shutting off the wiper motor with the negative battery cable, then remove the wiper module from beneath the vehicle. After that, unscrew the nut holding the crank arm onto the wiper motor shaft. Put marks on the wiper module and crank arm to ensure they are lined up when you put the bike back together. After that, lift the crank arm off the wiper motor shaft. Remove the three retaining bolts of the wiper motor after that and lastly, pull the wiper motor out from the module.