OEM 2008 Chrysler Crossfire Wiper Arm

Windshield Wiper Arm
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Wiper Arms found

  • 2008 Chrysler Crossfire Wiper Arm - 5098617AA
    2008 Chrysler Crossfire Wiper Arm Diagram - 5098617AA
    View related parts
    Product Specifications
    • Other Name: Arm Wiper - Wiper; Windshield Wiper Arm, Right; Arm Wiper
    • Position: Passenger Side
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5098617AA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    Fits the following 2008 Chrysler Crossfire Submodels:
    • Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
  • 2008 Chrysler Crossfire Wiper Arm - 5097935AA
    2008 Chrysler Crossfire Wiper Arm Diagram - 5097935AA
    View related parts
    Product Specifications
    • Other Name: Motor - Windshield Wiper; Windshield Wiper Motor; Motor Windshield Wiper
    • Item Weight: 4.00 Pounds
    • Item Dimensions: 10.2 x 5.4 x 5.3 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5097935AA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2008 Chrysler Crossfire Submodels:
    • Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
  • 2008 Chrysler Crossfire Wiper Arm - 5104752AA
    2008 Chrysler Crossfire Wiper Arm Diagram - 5104752AA
    View related parts
    Product Specifications
    • Other Name: Arm Wiper - Wiper; Windshield Wiper Arm, Left; Arm Wiper
    • Position: Driver Side
    • Item Weight: 0.90 Pounds
    • Item Dimensions: 17.6 x 3.2 x 1.5 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5104752AA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2008 Chrysler Crossfire Submodels:
    • Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS

2008 Chrysler Crossfire Wiper Arm Parts and Q&A

  • Q: How to Detach a Wiper Arm on 2008 Chrysler Crossfire?
    A: Always remove the ignition key before you try to take the wiper arm off to avoid damage to yourself from the wiper system. Open the hood and pull out the hood prop as far as you can. Raise the wiper arm above its resting spot and once it's in its high position, remove the plastic cap covering the screw at the wiper pivot. Subsequently, unfasten the nut that's holding the wiper arm to the wiper pivot shaft. Using a proper battery terminal puller, release the wiper arm from the tapered splines on the wiper pivot shaft to avoid corroded parts. When you are done, take the wiper arm pivot end off the wiper pivot shaft.

Related 2008 Chrysler Crossfire Parts