OEM 2007 Chrysler Pacifica Alternator

Generator
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Alternators found

  • 2007 Chrysler Pacifica Alternator - 4801480AB
    2007 Chrysler Pacifica Alternator Diagram - 4801480AB
    View related parts

    2007 Chrysler Pacifica Alternator Part Number: 4801480AB

    $382.86 MSRP: $559.00
    You Save: $176.14 (32%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Alternator - Engine; Alternators; Generator Engine
    • Item Weight: 2.00 Pounds
    • Item Dimensions: 10.4 x 9.8 x 10.5 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 4801480AB
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2007 Chrysler Pacifica Submodels:
    • Base, LX, Limited, Touring | 6 Cyl 4.0 L GAS
  • 2007 Chrysler Pacifica Alternator - 4801322AB
    2007 Chrysler Pacifica Alternator Diagram - 4801322AB
    View related parts
    Product Specifications
    • Other Name: Alternator - Engine; Alternators; Generator Engine
    • Item Weight: 16.10 Pounds
    • Item Dimensions: 10.4 x 10.0 x 10.0 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 4801322AB
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2007 Chrysler Pacifica Submodels:
    • Base, LX | 6 Cyl 3.8 L GAS

2007 Chrysler Pacifica Alternator Parts and Q&A

  • Q: How to Install an Alternator on a 3.8L Engine on 2007 Chrysler Pacifica?
    A: Place the idler pulley on the end of the generator before installing the whole unit in the vehicle. Tighten these parts of your suspension loosely in place. Screw the idler pulley into place first, before tightening all other bolts to 54.2 Nm (40 ft. lbs.). After that, handle the power steering pump assembly carefully and screw it in place with three bolts tightened to 23 Nm (200 in. lbs.). Put on the accessory drive belt and join the battery cable to the generator, holding the nut in place and turning it by 12.5 Nm (110 in. lbs.). Re-secure the cable so the snap-on cover is in place, connect the field connector and complete it by locking the connector. Next, attach the negative terminal of the battery and put the air box back together.

Related 2007 Chrysler Pacifica Parts