How is the Blower Motor Installed in the HVAC Housing on 2007 Chrysler Sebring?

Lay the blower motor into the bottom part of the HVAC enclosure. If your system has a wire lead bracket, fit it into the HVAC housing and secure it with the three screws at 1.2 Nm (10 in. lbs.). Connect the instrument panel wire harness connector to the blower motor and click the lock tightly in place. If you have a silencer, fix it below the passenger side of the instrument panel. At last, attach the negative battery cable back to the battery.

OEM 2007 Chrysler Sebring Blower Motor

A/C Heater Blower Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Blower Motor found

View related parts
2007 Chrysler Sebring MOTOR-BLOWER WITH WHEEL Part Number: 5191345AB
$133.69 MSRP: $197.00
You Save: $63.31 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- SKU: 5191345AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2007 Chrysler Sebring Submodels:
- Base, LX, Limited, Touring | 2.4L L4, 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

2007 Chrysler Sebring Blower Motor Parts and Q&A

Q: How is the Blower Motor Installed in the HVAC Housing on 2007 Chrysler Sebring?
A: Lay the blower motor into the bottom part of the HVAC enclosure. If your system has a wire lead bracket, fit it into the HVAC housing and secure it with the three screws at 1.2 Nm (10 in. lbs.). Connect the instrument panel wire harness connector to the blower motor and click the lock tightly in place. If you have a silencer, fix it below the passenger side of the instrument panel. At last, attach the negative battery cable back to the battery.