How to Remove and Replace a Catalytic Converter in a 2.0/2.4L Engine on 2007 Chrysler Sebring?

Before starting, make sure to clean the surfaces of the manifold, then put a new gasket onto the exhausted manifold. If you're replacing the catalytic converter, mount the downstream oxygen sensor to the new part. Place the catalytic converter onto the exhaust manifold and loosely install the resonator/pipe and muffler/pipe assembly to the other end of the catalytic converter. Attach support isolators beneath the muffler mounts and line up the exhaust so it doesn't interfere with underbody parts, making sure each support isolator takes an equal load. Screw the fasteners that attach the catalytic converter to the exhaust manifold to 28 Nm (250 in. lbs.) and tighten the resonator/pipe assembly band clamp to 54 Nm (40 ft. lbs.). After your muffler connection, lower the vehicle, switch on the engine and examine the exhaust system, fixing any leaks you discover. Lastly, ensure the exhaust pipes are not in contact with body panels and set them properly as you see fit.

OEM 2007 Chrysler Sebring Catalytic Converter

Cat. Converter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Catalytic Converters found

View related parts
2007 Chrysler Sebring Catalytic Converter, Driver Side Part Number: 5171141AC
$2065.20 MSRP: $3030.00
You Save: $964.80 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold - Exhaust And Catalytic Conve; Catalytic Converter with Integrated Exhaust Manifold, Left; Exhaust Manifold; Manifold; Manifold Exhaust And Catalytic Converter
- Position: Driver Side
- Item Weight: 12.10 Pounds
- Item Dimensions: 18.9 x 12.8 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5171141AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler Sebring Submodels:
- Limited | 6 Cyl 3.5 L GAS
View related parts
2007 Chrysler Sebring Catalytic Converter, Passenger Side Part Number: 5171140AC
$2340.00 MSRP: $3425.00
You Save: $1085.00 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter - Exhaust and Catalytic Converter; Right Catalytic Converter with Integrated Manifold.; Manifold
- Position: Passenger Side
- Replaces: 5171140AB
- Item Weight: 16.40 Pounds
- Item Dimensions: 18.5 x 16.5 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5171140AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler Sebring Submodels:
- Limited | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
2007 Chrysler Sebring Catalytic Converter, Driver Side Part Number: 5171143AD
$943.68 MSRP: $1360.00
You Save: $416.32 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter - Catalytic; Catalytic Converter with Integrated Exhaust Manifold, Left; Exhaust Manifold; Manifold
- Position: Driver Side
- Replaces: 5171143AC
- Item Weight: 11.70 Pounds
- Item Dimensions: 18.8 x 13.0 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5171143AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler Sebring Submodels:
- Limited | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
2007 Chrysler Sebring Catalytic Converter, Rear Part Number: 5105049AC
$1790.40 MSRP: $2620.00
You Save: $829.60 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter - Catalytic; Catalytic Converter, Rear; Exhaust Pipe; Converter & Pipe; Converter Catalytic If Vin Filtered, Check Item 4; Converter Catalytic
- Position: Rear
- Replaces: 5105049AB
- Item Weight: 12.00 Pounds
- Item Dimensions: 40.5 x 5.3 x 4.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5105049AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler Sebring Submodels:
- Base, LX, Limited, Touring | 4 Cyl 2.4 L GAS
View related parts
2007 Chrysler Sebring Exhaust Manifold, Driver Side Part Number: 4892149AE
$2048.03 MSRP: $3000.00
You Save: $951.97 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold - Exhaust And Catalytic Conve; Catalytic Converter with Integrated Exhaust Manifold, Left; Manifold; Manifold Exhaust And Catalytic Converter
- Position: Driver Side
- Item Weight: 13.70 Pounds
- Item Dimensions: 18.4 x 13.3 x 7.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4892149AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler Sebring Submodels:
- Base, LX, Limited, Touring | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
2007 Chrysler Sebring Exhaust Manifold, Passenger Side Part Number: 4892148AE
$2317.10 MSRP: $3395.00
You Save: $1077.90 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold - Exhaust And Catalytic Conve; Catalytic Converter with Integrated Exhaust Manifold, Right; Manifold; Manifold Exhaust And Catalytic Converter
- Position: Passenger Side
- Item Weight: 11.60 Pounds
- Item Dimensions: 19.6 x 13.4 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4892148AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler Sebring Submodels:
- Base, LX, Limited, Touring | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
2007 Chrysler Sebring Catalytic Converter, Passenger Side Part Number: 5171142AB
$2346.30 MSRP: $3425.00
You Save: $1078.70 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter - Exhaust And Catalytic Converter; Catalytic Converter with Integrated Exhaust Manifold, Right; Exhaust Manifold; Manifold; Manifold Exhaust And Catalytic Converter
- Position: Passenger Side
- Item Weight: 12.00 Pounds
- Item Dimensions: 19.1 x 13.5 x 8.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5171142AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler Sebring Submodels:
- Limited | 6 Cyl 3.5 L GAS
View related parts
2007 Chrysler Sebring Exhaust Manifold, Driver Side Part Number: 4892155AD
$2694.95 MSRP: $3945.00
You Save: $1250.05 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold - Exhaust And Catalytic Conve; Catalytic Converter with Integrated Exhaust Manifold, Left; Manifold; Manifold Exhaust And Catalytic Converter
- Position: Driver Side
- Item Weight: 11.70 Pounds
- Item Dimensions: 18.4 x 13.3 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4892155AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler Sebring Submodels:
- Base, LX, Limited, Touring | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
2007 Chrysler Sebring Exhaust Manifold, Passenger Side Part Number: 4892154AD
$2935.40 MSRP: $4300.00
You Save: $1364.60 (32%)
Product Specifications
- Other Name: Manifold - Exhaust And Catalytic Conve; Catalytic Converter with Integrated Exhaust Manifold, Right; Manifold; Manifold Exhaust And Catalytic Converter
- Position: Passenger Side
- Item Weight: 12.50 Pounds
- Item Dimensions: 17.7 x 13.5 x 7.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4892154AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler Sebring Submodels:
- Base, LX, Limited, Touring | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS

2007 Chrysler Sebring Catalytic Converter Parts and Q&A

Q: How to Remove and Replace a Catalytic Converter in a 2.0/2.4L Engine on 2007 Chrysler Sebring?
A: Before starting, make sure to clean the surfaces of the manifold, then put a new gasket onto the exhausted manifold. If you're replacing the catalytic converter, mount the downstream oxygen sensor to the new part. Place the catalytic converter onto the exhaust manifold and loosely install the resonator/pipe and muffler/pipe assembly to the other end of the catalytic converter. Attach support isolators beneath the muffler mounts and line up the exhaust so it doesn't interfere with underbody parts, making sure each support isolator takes an equal load. Screw the fasteners that attach the catalytic converter to the exhaust manifold to 28 Nm (250 in. lbs.) and tighten the resonator/pipe assembly band clamp to 54 Nm (40 ft. lbs.). After your muffler connection, lower the vehicle, switch on the engine and examine the exhaust system, fixing any leaks you discover. Lastly, ensure the exhaust pipes are not in contact with body panels and set them properly as you see fit.