How to Install a Catalytic Converter for a 2.0/2.4L Engine on Chrysler Sebring?

Before putting in the catalytic converter, clean the seal area of the manifold and then apply a new gasket to it. When you replace the catalytic converter, move the downstream oxygen sensor to the new unit. Place the catalytic converter on the exhaust manifold, then loosely secure the resonator or pipe and muffler or pipe assembly to the converter's outlet pipe. Set support isolators under the muffler and check that there is enough space between the exhaust and the lower parts of the vehicle, so that all support points carry equal weight. Match the bottom nut tightness to the exhaust manifold with the connection of the catalytic converter at 28 Nm (250 in. lbs.). Also, tighten the clamp connecting the resonator/pipe assembly band to 54 Nm (40 ft. lbs.). Following our steps, inspect the exhaust system for leaks by starting the engine. Check if the car's exhaust touches any body parts and change it where necessary.

How to Remove and Replace a Catalytic Converter on a 2.0/2.4L Engine on Chrysler Sebring?

Before installing the catalytic converter on a 2.0/2.4L engine, wipe clean all sealing parts of the manifold and put a new exhaust manifold gasket where needed. When doing the replacement, move the downstream oxygen sensor to the new catalytic converter. Fasten the catalytic converter to the exhaust manifold loosely and then loosely install the assembly of resonator/pipe and muffler/pipe to the catalytic converter's outlet pipe. Add support isolators to the muffler supports and check that the exhaust is not too close to the underbody, so that all the support isolators bear equal weight on the car. Tighten the fasteners connected to the catalytic converter and the exhaust manifold to 28 Nm (250 in. lbs.) and to the resonator/pipe assembly band to 54 Nm (40 ft. lbs.) prior to driving. Attach the ground strap to the muffler, lower the vehicle and start up the engine to check for exhaust leaks, repairing any you find. Also, make sure the exhaust parts are not touching any body panels and modify anything that needs it.

OEM Chrysler Sebring Catalytic Converter

Cat. Converter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

39 Catalytic Converters found

View related parts
Chrysler Sebring Catalytic Converter, Driver Side Part Number: 5171141AC
$2065.20 MSRP: $3030.00
You Save: $964.80 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold - Exhaust And Catalytic Conve; Catalytic Converter with Integrated Exhaust Manifold, Left; Exhaust Manifold; Manifold; Manifold Exhaust And Catalytic Converter
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chrysler Sebring | Limited | 6 Cyl 3.5 L GAS
View related parts
Chrysler Sebring Catalytic Converter, Passenger Side Part Number: 5171140AC
$2340.00 MSRP: $3425.00
You Save: $1085.00 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter - Exhaust and Catalytic Converter; Right Catalytic Converter with Integrated Manifold.; Manifold
- Position: Passenger Side
- Replaces: 5171140AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Limited | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
Chrysler Sebring Catalytic Converter, Driver Side Part Number: 5171143AD
$943.68 MSRP: $1360.00
You Save: $416.32 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter - Catalytic; Catalytic Converter with Integrated Exhaust Manifold, Left; Exhaust Manifold; Manifold
- Position: Driver Side
- Replaces: 5171143AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Limited | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
Chrysler Sebring Catalytic Converter, Passenger Side Part Number: 68042142AB
$1504.15 MSRP: $2205.00
You Save: $700.85 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter - Exhaust and Catalytic Converter; Right Catalytic Converter with Integrated Manifold.; Manifold
- Position: Passenger Side
- Replaces: 68042142AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Chrysler Sebring | Limited | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
Chrysler Sebring Catalytic Converter, Rear Part Number: 5105049AC
$1790.40 MSRP: $2620.00
You Save: $829.60 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter - Catalytic; Catalytic Converter, Rear; Exhaust Pipe; Converter & Pipe; Converter Catalytic If Vin Filtered, Check Item 4; Converter Catalytic
- Position: Rear
- Replaces: 5105049AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2008 Chrysler Sebring | Base, LX, Limited, Touring | 4 Cyl 2.4 L GAS
View related parts
Chrysler Sebring Catalytic Converter Part Number: 68039232AA
$1579.15 MSRP: $2310.00
You Save: $730.85 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter - Catalytic; Converter Catalytic
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Chrysler Sebring | LX, Limited, Touring | 4 Cyl 2.4 L GAS
View related parts
Chrysler Sebring Catalytic Converter Part Number: 5105126AD
$1579.15 MSRP: $2310.00
You Save: $730.85 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter - Catalytic; Exhaust Pipe; Converter & Pipe; Converter Catalytic If Vin Filtered, Check Item 4; Converter Catalytic
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chrysler Sebring | LX, Limited, Touring | 4 Cyl 2.4 L GAS
View related parts
Chrysler Sebring Catalytic Converter, Driver Side Part Number: 68042141AB
$1922.08 MSRP: $2820.00
You Save: $897.92 (32%)
ADD TO CART
Product Specifications
- Other Name: Converter - Exhaust and Catalytic Converter; Left Catalytic Converter with Integrated Manifold.; Manifold
- Position: Driver Side
- Replaces: 68042141AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Chrysler Sebring | Limited | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
Chrysler Sebring Exhaust Manifold, Driver Side Part Number: 4892149AE
$2048.03 MSRP: $3000.00
You Save: $951.97 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold - Exhaust And Catalytic Conve; Catalytic Converter with Integrated Exhaust Manifold, Left; Manifold; Manifold Exhaust And Catalytic Converter
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Base, LX, Limited, Touring | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
Chrysler Sebring Exhaust Manifold, Passenger Side Part Number: 4892148AE
$2317.10 MSRP: $3395.00
You Save: $1077.90 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold - Exhaust And Catalytic Conve; Catalytic Converter with Integrated Exhaust Manifold, Right; Manifold; Manifold Exhaust And Catalytic Converter
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Base, LX, Limited, Touring | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
Chrysler Sebring Catalytic Converter Part Number: 68047733AA
$2614.80 MSRP: $3800.00
You Save: $1185.20 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter - Catalytic; Exhaust Pipe; Converter & Pipe; Converter Catalytic
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Chrysler Sebring | LX, Limited, Touring | 4 Cyl 2.4 L GAS
View related parts
Chrysler Sebring Catalytic Converter, Passenger Side Part Number: 5171142AB
$2346.30 MSRP: $3425.00
You Save: $1078.70 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter - Exhaust And Catalytic Converter; Catalytic Converter with Integrated Exhaust Manifold, Right; Exhaust Manifold; Manifold; Manifold Exhaust And Catalytic Converter
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chrysler Sebring | Limited | 6 Cyl 3.5 L GAS
View related parts
Chrysler Sebring Exhaust Manifold, Driver Side Part Number: 4892155AD
$2694.95 MSRP: $3945.00
You Save: $1250.05 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold - Exhaust And Catalytic Conve; Catalytic Converter with Integrated Exhaust Manifold, Left; Manifold; Manifold Exhaust And Catalytic Converter
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Base, LX, Limited, Touring | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
Chrysler Sebring Catalytic Converter Part Number: 4764618AD
Product Specifications
- Other Name: Converter - Catalytic; Converter Catalytic [4 Cylinder Engines]; Converter Catalytic
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2004 Chrysler Sebring | Base, GTC, LX, LXi, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
Chrysler Sebring Catalytic Converter Part Number: 4764618AF
Product Specifications
- Other Name: Converter - Catalytic; Converter Catalytic [4 Cylinder Engines]
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2006 Chrysler Sebring | Base, GTC, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
Chrysler Sebring Exhaust Manifold, Passenger Side Part Number: 4892154AD
$2935.40 MSRP: $4300.00
You Save: $1364.60 (32%)
Product Specifications
- Other Name: Manifold - Exhaust And Catalytic Conve; Catalytic Converter with Integrated Exhaust Manifold, Right; Manifold; Manifold Exhaust And Catalytic Converter
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Base, LX, Limited, Touring | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
Chrysler Sebring Catalytic Converter, Rear Part Number: MR968966
Product Specifications
- Other Name: Converter - Catalytic; Catalytic Converter, Rear; Converter Catalytic
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2004 Chrysler Sebring | LXi, Limited | 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Catalytic Converter, Front Part Number: MR968965
Product Specifications
- Other Name: Converter - Catalytic; Catalytic Converter, Front; Converter Catalytic
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2004 Chrysler Sebring | LXi, Limited | 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Catalytic Converter, Rear Part Number: MR464479
Product Specifications
- Other Name: Converter - Catalytic; Catalytic Converter, Rear; Converter Catalytic
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2002 Chrysler Sebring | LX, LXi | 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Catalytic Converter, Front Part Number: MR464478
Product Specifications
- Other Name: Converter - Catalytic; Catalytic Converter, Front; Converter Catalytic
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2002 Chrysler Sebring | LX, LXi | 6 Cyl 3.0 L GAS

| Page 1 of 2 |Next >

1-20 of 39 Results

Chrysler Sebring Catalytic Converter

Choose OEM Catalytic Converter that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Catalytic Converter follows strict manufacturing steps to lock in quality and fit. If your Chrysler Sebring matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Sebring parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Catalytic converters are part of Sebring's exhaust and emission systems which has the responsibility of burning combustion products to less hazardous elements. It mainly oxidizes CO, HC and NOx into water vapour, CO2 and nitrogen by chemical reactions on the surface of the platinum substrate containing metal catalysts such as platinum, palladium and rhodium. Chrysler Sebring cars over the years have incorporated a variety of catalytic converter technologies and these are the two way and the three way. The latter was made standard by 1981 and helped improve the reduction of NOx emission. There are also high performance catalytic converters which offer higher flow rates in order to maximize the engine potential while at the same time achieving the required catalytic activity. These converters can be direct fit or universal: direct fit converters are bolt-in while universal ones need some additional work to be installed.

Chrysler Sebring Catalytic Converter Parts and Q&A

Catalytic Converter, Driver Side
5171143AD
Q: How to Install a Catalytic Converter for a 2.0/2.4L Engine on Chrysler Sebring?
A:
Before putting in the catalytic converter, clean the seal area of the manifold and then apply a new gasket to it. When you replace the catalytic converter, move the downstream Oxygen Sensor to the new unit. Place the catalytic converter on the Exhaust Manifold, then loosely secure the resonator or pipe and muffler or pipe assembly to the converter's outlet pipe. Set support isolators under the muffler and check that there is enough space between the exhaust and the lower parts of the vehicle, so that all support points carry equal weight. Match the bottom nut tightness to the exhaust manifold with the connection of the catalytic converter at 28 Nm (250 in. lbs.). Also, tighten the clamp connecting the resonator/pipe assembly band to 54 Nm (40 ft. lbs.). Following our steps, inspect the exhaust system for leaks by starting the engine. Check if the car's exhaust touches any body parts and change it where necessary.
Catalytic Converter, Driver Side
5171141AC
Q: How to Remove and Replace a Catalytic Converter on a 2.0/2.4L Engine on Chrysler Sebring?
A:
Before installing the catalytic converter on a 2.0/2.4L engine, wipe clean all sealing parts of the manifold and put a new Exhaust Manifold gasket where needed. When doing the replacement, move the downstream Oxygen Sensor to the new catalytic converter. Fasten the catalytic converter to the exhaust manifold loosely and then loosely install the assembly of resonator/pipe and muffler/pipe to the catalytic converter's outlet pipe. Add support isolators to the muffler supports and check that the exhaust is not too close to the underbody, so that all the support isolators bear equal weight on the car. Tighten the fasteners connected to the catalytic converter and the exhaust manifold to 28 Nm (250 in. lbs.) and to the resonator/pipe assembly band to 54 Nm (40 ft. lbs.) prior to driving. Attach the ground strap to the muffler, lower the vehicle and start up the engine to check for exhaust leaks, repairing any you find. Also, make sure the exhaust parts are not touching any body panels and modify anything that needs it.