How to Install the Hood Cable for Latch Release on 2007 Chrysler Sebring?

First, send the hood cable (1) up through the dash hole and then along the inside rail of the car. Afterward, fit the rubber grommet to the lower dash panel and use the push-in fastener on the hood cable. Connect the hood cable handle to the inner cowl panel with screws (2), tightening these screws to 1.8 Nm (16 in. lbs.). Then, set in the left front cowl trim panel and clip the hood cable from the A-pillar clips (5) below the inner hood frame rail.

OEM 2007 Chrysler Sebring Hood Cable

Hood Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Hood Cable found

View related parts
2007 Chrysler Sebring Release Cable, Front Part Number: 4389822AF
$79.65 MSRP: $119.00
You Save: $39.35 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable - Hood Latch; Hood Release Cable, Front; Release Hood Latch; Hood Release Cable
- Position: Front
- Replaces: 4389822AD, 4389822AC, 4389822AB, 4389822AE
- Item Weight: 0.80 Pounds
- Item Dimensions: 3.6 x 10.3 x 13.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4389822AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler Sebring Submodels:
- Base, LX, Limited, Touring | 2.4L L4, 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

2007 Chrysler Sebring Hood Cable Parts and Q&A

Q: How to Install the Hood Cable for Latch Release on 2007 Chrysler Sebring?
A: First, send the hood cable (1) up through the dash hole and then along the inside rail of the car. Afterward, fit the rubber grommet to the lower dash panel and use the push-in fastener on the hood cable. Connect the hood cable handle to the inner cowl panel with screws (2), tightening these screws to 1.8 Nm (16 in. lbs.). Then, set in the left front cowl trim panel and clip the hood cable from the A-pillar clips (5) below the inner hood frame rail.