How to install the upper control arm on 2007 Dodge Caliber?

After placing the upper control arm, secure it to the crossmember with a bolt but don't make it tight yet. Then, fit the bolt and nut at the top of the control arm that join it to the trailing link, but don't tighten anything yet. After that, fit the tire and create the wheel assembly before tightening the wheel mounting nuts to 135 Nm (100 ft. lbs.). Place the car on the ground and lift it onto an alignment rack or drive-on lift, raising or lowering it to reach the mounting bolts and nuts. Screw the upper control arm mounting bolt at the crossmember to a tightness of 95 Nm (70 ft. lbs.) and the upper controls mounting bolt nut at the trailing link to the same level. Perform wheel alignment whenever it becomes necessary.

OEM 2007 Dodge Caliber Control Arm

Suspension Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Control Arms found

View related parts
2007 Dodge Caliber Lower Control Arm, Front Passenger Side Part Number: 5105040AI
$70.13 MSRP: $104.00
You Save: $33.87 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Lower Control; Front Right Suspension Control Arm and Ball Joint Assembly; Control Arm Bushing.; Arm Lower Control Front; Control Arm
- Position: Front Lower Passenger Side
- Replaces: 5105040AC, 5105040AH, 5105040AB, 5105040AG, 5105040AE, 5105040AD, 5105040AF
- Item Weight: 7.20 Pounds
- Item Dimensions: 3.0 x 15.8 x 18.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5105040AI
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2007 Dodge Caliber Lower Control Arm, Front Driver Side Part Number: 5105041AI
$292.31 MSRP: $436.00
You Save: $143.69 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Lower Control; Front Left Suspension Control Arm and Ball Joint Assembly; Control Arm Bushing.; Arm Lower Control Front; Control Arm
- Position: Front Lower Driver Side
- Replaces: 5105041AF, 5105041AB, 5105041AE, 5105041AG, 5105041AH, 5105041AC, 5105041AD
- Item Weight: 7.30 Pounds
- Item Dimensions: 30.3 x 13.5 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5105041AI
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2007 Dodge Caliber Lower Control Arm, Rear Part Number: 5105272AE
$93.36 MSRP: $207.00
You Save: $113.64 (55%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link - Rear Lateral; Suspension Control Arm, Rear Lower; Suspension Control Arm; Control Arm
- Position: Rear Lower
- Replaces: 5105272AB, 5105272AA, 5105272AC, 5105272AD
- Item Weight: 5.80 Pounds
- Item Dimensions: 22.6 x 3.6 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5105272AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, Uptown | 1.8L L4, 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2007 Dodge Caliber Control Arm Parts and Q&A

Q: How to install the upper control arm on 2007 Dodge Caliber?
A: After placing the upper control arm, secure it to the crossmember with a bolt but don't make it tight yet. Then, fit the bolt and nut at the top of the control arm that join it to the trailing link, but don't tighten anything yet. After that, fit the tire and create the wheel assembly before tightening the wheel mounting nuts to 135 Nm (100 ft. lbs.). Place the car on the ground and lift it onto an alignment rack or drive-on lift, raising or lowering it to reach the mounting bolts and nuts. Screw the upper control arm mounting bolt at the crossmember to a tightness of 95 Nm (70 ft. lbs.) and the upper controls mounting bolt nut at the trailing link to the same level. Perform wheel alignment whenever it becomes necessary.