Other Name: Seat Belt - Front Inner; Seat Belt Receptacle, Front Right; Latch
Position: Front Inner Passenger Side
Item Weight: 0.80 Pounds
Item Dimensions: 7.1 x 2.1 x 1.8 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 1CY361DVAA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2007 Dodge Caliber Submodels:
R/T, SE, SXT | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
2007 Dodge Caliber Seat Belt Parts and Q&A
Q: How to Install the Rear Outer Seat Belt Retractor on 2007 Dodge Caliber?
A: Seat the rear outer seatbelt retractor into the C-pillar and tighten the rear outer seatbelt retractor retaining bolt to 40 Nm. You should now put in the upper seatbelt turning loop bolt and tighten it to 40 Nm (29.5 ft. lbs.). Secure the seatbelt webbing via the trim panel above the rear seat, then put in the rear outer seatbelt anchor bolt, make sure to tighten it to 40 Nm (29.5 ft. lbs.). Following this, you should install the rear quarter panel trim and the upper C-pillar trim.