How to Install a Wiper Motor on 2007 Dodge Caliber?

Place the front wiper motor into the cowl plenum and the knob-shaped rubber isolator in the hole on the cowl front wall, pulling the module outboard until the isolator fits into the hole. Slide the front wiper module bracket onto the stamped brackets in the cowl plenum and use two screws per end to loosely hold it, then tighten the screws by starting with the driver side and going to the passenger side. Attach the wire harness connector to the front wiper motor connector and insert the routing clip over the stud in the cowl plenum. After you turn on the ignition switch and move the front wiper switch a bit, reinstall the cowl plenum cover/grille panel and the front wiper motor arms onto the wiper pivots. In the end, secure the cable to the battery negative post.

OEM 2007 Dodge Caliber Wiper Motor

Windshield Wiper Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Wiper Motors found

View related parts
2007 Dodge Caliber Wiper Motor Part Number: 5183273AB
$107.29 MSRP: $185.00
You Save: $77.71 (43%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor - Windshield Wiper; Windshield Wiper Motor; Motor Kit Windshield Wiper
- Replaces: 5183273AA
- Item Weight: 3.30 Pounds
- Item Dimensions: 10.8 x 6.0 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5183273AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 1.8L L4, 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2007 Dodge Caliber Wiper Transmission Part Number: 5303780AG
$60.94 MSRP: $159.00
You Save: $98.06 (62%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor - Windshield Wiper; Wiper Linkage; Motor & Linkage
- Replaces: 5303780AB, 5303780AE, 5303780AC, 5303780AD, 5303780AF
- Item Weight: 7.10 Pounds
- Item Dimensions: 36.0 x 12.2 x 10.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5303780AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 1.8L L4, 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2007 Dodge Caliber Wiper Motor Part Number: 5116146AE
$95.89 MSRP: $144.00
You Save: $48.11 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor, Liftgate Wiper; Back Glass Wiper Motor; Rear Motor; Motor Liftgate Wiper
- Replaces: 5116146AD, 5116146AC
- Item Weight: 2.40 Pounds
- Item Dimensions: 10.4 x 6.3 x 6.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5116146AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 1.8L L4, 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2007 Dodge Caliber Wiper Motor Parts and Q&A

Q: How to Install a Wiper Motor on 2007 Dodge Caliber?
A: Place the front wiper motor into the cowl plenum and the knob-shaped rubber isolator in the hole on the cowl front wall, pulling the module outboard until the isolator fits into the hole. Slide the front wiper module bracket onto the stamped brackets in the cowl plenum and use two screws per end to loosely hold it, then tighten the screws by starting with the driver side and going to the passenger side. Attach the wire harness connector to the front wiper motor connector and insert the routing clip over the stud in the cowl plenum. After you turn on the ignition switch and move the front wiper switch a bit, reinstall the cowl plenum cover/grille panel and the front wiper motor arms onto the wiper pivots. In the end, secure the cable to the battery negative post.