How to Remove and Service a Wiper Motor on Dodge Caliber?

Remove and isolate the battery's negative terminal before you handle the wiper motor. Then, disconnect the front wiper arms from their pivots and lift off the cowl plenum cover/grille panel that shelters the front wiper module. Take the routing clip off the stud seated in the cowl plenum and pull the green wire harness connector loose from the receptacle marked for the front wiper motor. After that, take out the two screws that hold the ends of the front wiper module bracket to the stamped brackets in the cowl plenum. Bring the front wiper module toward the steering wheel enough to pull the rubber knob-like isolator off the wall on the front inside of the cowl plenum and then lift the whole front wiper module up and out of the cowl plenum.

How to Install a Wiper Motor on Dodge Caliber?

At first, put the new rubber grommet into the rear wiper motor output shaft hole in the rear window glass before doing anything else. Look to make sure the U-nuts are all present and properly installed inside the liftgate. When the rear wiper motor is reinstalled, cover the output shaft taper just below the motor with Mopar(R) Nye Synthetic Lubricant or Fluorocarbon Gel 880 Synthetic Lubricant, to keep away premature grommet failures, more stress on the motor and water damage. Then, insert the lifting motor output shaft into the rubber grommet on the rear liftgate glass, place the motor and bracket together into the U-nuts inside the liftgate panel and affix the bracket to the liftgate using three screws. Connect the hidden wire harness on the liftgate to the wiper motor receptacle, apply the inner liftgate trim again and then reinstall the rear wiper arm to the wire harness' output shaft. Don't forget to reattach the negative cable from the battery.

OEM Dodge Caliber Wiper Motor

Windshield Wiper Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Wiper Motors found

View related parts
Dodge Caliber Wiper Transmission Part Number: 5303780AG
$60.94 MSRP: $159.00
You Save: $98.06 (62%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor - Windshield Wiper; Wiper Linkage; Motor & Linkage
- Replaces: 5303780AB, 5303780AE, 5303780AC, 5303780AD, 5303780AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2012 Dodge Caliber | Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 1.8L L4, 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Caliber Wiper Motor Part Number: 5183273AB
$107.29 MSRP: $185.00
You Save: $77.71 (43%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor - Windshield Wiper; Windshield Wiper Motor; Motor Kit Windshield Wiper
- Replaces: 5183273AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2012 Dodge Caliber | Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 1.8L L4, 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Caliber Wiper Motor Part Number: 5116146AE
$95.89 MSRP: $144.00
You Save: $48.11 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor, Liftgate Wiper; Back Glass Wiper Motor; Rear Motor; Motor Liftgate Wiper
- Replaces: 5116146AD, 5116146AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2012 Dodge Caliber | Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 1.8L L4, 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

Dodge Caliber Wiper Motor

Choose OEM Wiper Motor that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Wiper Motor follows strict manufacturing steps to lock in quality and fit. If your Dodge Caliber matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Caliber parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Since the year 2007 to 2012, the Dodge Caliber is a compact hatch back hence it is important to note that the Dodge Caliber Wiper Motor is one of the important products that will help to improve the performance rate and safety of this car. For viscous control and adjustable rates of the windshield wipers to remove accumulated rain, snow, or debris, this Wiper Motor is renowned for its reliability. This feature alone is ideal for enhancing the safety of the driver during harsh weather conditions and therefore the Dodge Caliber is ideal for most terrains. The Wiper Motor will fit into Caliber SE and Caliber SXT, so that all the drivers will be able to experience first-hand the efficiency of this component. New and refurbished Wiper Motors are included in the package; refurbished ones are brought to standard to guarantee a high-performing part to enhance the vehicle's performance and handling. For instance, the Wiper Motor enjoys much recognition within the auto pan due to its durability, as well as its ability efficiently perform the function necessary for the proper operation of the car. As mentioned, the Wiper Motor is incorporated into the Dodge Caliber's design integrated transforming this auto component into a major component of the car's operation making it vital in improving the efficiency and safety of the car. Altogether, the Wiper Motor can be characterized as a vivid example of the quality and performance that is typical for the Dodge, thus allowing driving under any weather conditions.

Dodge Caliber Wiper Motor Parts and Q&A

Wiper Motor
5116146AE
Q: How to Remove and Service a Wiper Motor on Dodge Caliber?
A:
Remove and isolate the battery's negative terminal before you handle the wiper motor. Then, disconnect the front Wiper Arms from their pivots and lift off the cowl plenum cover/grille panel that shelters the front wiper module. Take the routing clip off the stud seated in the cowl plenum and pull the green wire harness connector loose from the receptacle marked for the front wiper motor. After that, take out the two screws that hold the ends of the front wiper module bracket to the stamped brackets in the cowl plenum. Bring the front wiper module toward the steering wheel enough to pull the rubber knob-like isolator off the wall on the front inside of the cowl plenum and then lift the whole front wiper module up and out of the cowl plenum.
Wiper Motor
5183273AB
Q: How to Install a Wiper Motor on Dodge Caliber?
A:
At first, put the new rubber grommet into the rear wiper motor output shaft hole in the rear window glass before doing anything else. Look to make sure the U-nuts are all present and properly installed inside the liftgate. When the rear wiper motor is reinstalled, cover the output shaft taper just below the motor with Mopar(R) Nye Synthetic Lubricant or Fluorocarbon Gel 880 Synthetic Lubricant, to keep away premature grommet failures, more stress on the motor and water damage. Then, insert the lifting motor output shaft into the rubber grommet on the rear liftgate glass, place the motor and bracket together into the U-nuts inside the liftgate panel and affix the bracket to the liftgate using three screws. Connect the hidden wire harness on the liftgate to the wiper motor receptacle, apply the inner liftgate trim again and then reinstall the rear Wiper Arm to the wire harness' output shaft. Don't forget to reattach the negative cable from the battery.