JeepParts
My Garage
My Account
Cart
OEM 2007 Dodge Durango Piston
Engine Pistons- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Pistons found
2007 Dodge Durango Piston Part Number: 68233351AA
Product Specifications- Replaces: 5012362AF, 5012362AE, 5012362AC, 5012362AD
- Item Weight: 3.00 Pounds
- Item Dimensions: 10.5 x 6.3 x 6.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68233351AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2007 Dodge Durango Piston Part Number: 5086011AC
Product Specifications- Other Name: Piston Pin And Rod See Note; Piston Pin And Rod See Note; Piston Pin And Rod
- Item Weight: 2.70 Pounds
- Item Dimensions: 12.8 x 5.7 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5086011AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2007 Dodge Durango Piston Part Number: 5086010AC
Product Specifications- Other Name: Piston Pin And Rod
- Item Weight: 2.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5086010AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2007 Dodge Durango Piston Part Number: 5019316AC
Product Specifications- Replaces: 5019316AA, 5019316AB
- Item Weight: 3.30 Pounds
- Item Dimensions: 11.3 x 7.3 x 6.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5019316AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2007 Dodge Durango Piston Parts and Q&A
- Q: How to Remove and Replace a Piston in an Engine on 2007 Dodge Durango?A: Before anything else, make sure the negative battery cable is disconnected so you don't get injured by electricity. Then, take out the oil pan and gasket/windage tray and next remove the cylinder head(s). If it's necessary, first clean the ridge on the cylinder bores with a ridge reamer, then take out the pistons while covering their tops. You should remove the connecting rods and pistons through the top of the cylinder block, spinning the crankshaft to align every connecting rod with the bore of the connecting rod and crankshaft. Do not stamp or punch the connecting rods or caps with a number, as it might damage them. Put marks at the positions of the connecting rods and bearing caps using a permanent ink marker or scribe tool; be sure not to graze or pierce the fractured surfaces. Put Special Tool 8507 Connecting Rod Guides into the connected rod's bore and then unbolt the piston from the cylinder bore. Make sure to repeat this process for all pistons. Take care not to nick the crankshaft journals, as it might cause damage to your engine. Remove both the piston and the connecting rod. Then, place the bearing cap on the connecting rod end where the fractured surfaces are, to protect them.
Related 2007 Dodge Durango Parts
2007 Dodge Durango Oil Filter
2007 Dodge Durango Camshaft
2007 Dodge Durango Oil Pump
2007 Dodge Durango Cam Gear
2007 Dodge Durango Crankshaft Pulley
2007 Dodge Durango Cylinder Head
2007 Dodge Durango Dipstick
2007 Dodge Durango Dipstick Tube
2007 Dodge Durango Lash Adjuster
2007 Dodge Durango Oil Pan Gasket
2007 Dodge Durango Rocker Arm
2007 Dodge Durango Valve Stem Seal