How to Service a Seat Heater Without Removing the OEM Heating Elements on 2006 Dodge Durango?

In order to maintain the seat heater, do not take out the OEM heating elements. Unconnect the negative battery, take off the trim cover and unconnect the faulty heating element. Trim Cut the wires straight, fit the new element, reconnect the battery, test, and reattach the trim cover, making sure the wires are well laid.

OEM 2006 Dodge Durango Seat Heater

Seat Warmer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Seat Heaters found

View related parts
2006 Dodge Durango Seat Cushion Heater, Lower Part Number: 5000013AA
Product Specifications
- Other Name: Pad; Seat Heater Pad, Lower; Heater Cushion; Seat Heater
- Position: Lower
- Item Weight: 0.60 Pounds
- Item Dimensions: 10.6 x 6.4 x 6.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5000013AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Durango Submodels:
- Adventurer, Limited, SLT, ST, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2006 Dodge Durango Seat Back Heater, Upper Part Number: 5000014AA
Product Specifications
- Other Name: Pad; Seat Heater Pad, Front, Upper; Element; Heater Back; Seat Heater
- Position: Upper
- Item Weight: 0.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5000014AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Durango Submodels:
- Adventurer, Limited, SE, SLT, ST, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2006 Dodge Durango Seat Heater Parts and Q&A

Q: How to Service a Seat Heater Without Removing the OEM Heating Elements on 2006 Dodge Durango?
A: In order to maintain the seat heater, do not take out the OEM heating elements. Unconnect the negative battery, take off the trim cover and unconnect the faulty heating element. Trim Cut the wires straight, fit the new element, reconnect the battery, test, and reattach the trim cover, making sure the wires are well laid.