How to Install a Speed Sensor on 2007 Dodge Durango?

To install the output speed sensor, put it in the transmission case and apply Mopar(R) Lock & Seal Adhesive to the bolt. Tighten the bolt at 9 Nm (80 In.lbs.), wire the connections and check for transmission fluid level, adding fluid if necessary before lowering the vehicle.

OEM 2007 Dodge Durango Speed Sensor

Speed Control Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Speed Sensors found

View related parts
2007 Dodge Durango Sensor - Wheel Speed Part Number: 56028668AH
$52.48 MSRP: $77.95
You Save: $25.47 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SENSOR-WHEEL SPEED
- Replaced by: 56028668AG
- SKU: 56028668AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2007 Dodge Durango Submodels:
- Adventurer, Limited, SLT, ST, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2007 Dodge Durango Speed Sensor, Rear Passenger Side Part Number: 56029317AB
Product Specifications
- Other Name: Sensor - Wheel Speed; ABS Wheel Speed Sensor, Rear Left, Rear Right; ABS Sensor; Rear Speed Sensor
- Position: Rear Passenger Side
- Replaces: 56029317AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.5 x 1.6 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56029317AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Durango Submodels:
- Adventurer, Limited, Limited Hybrid, SE, SLT, SXT | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS

2007 Dodge Durango Speed Sensor Parts and Q&A

Q: How to Install a Speed Sensor on 2007 Dodge Durango?
A: To install the output speed sensor, put it in the transmission case and apply Mopar(R) Lock & Seal Adhesive to the bolt. Tighten the bolt at 9 Nm (80 In.lbs.), wire the connections and check for transmission fluid level, adding fluid if necessary before lowering the vehicle.