How to Install a Speed Sensor on the Front Wheel on 2008 Dodge Durango?

You should start by connecting the cable to the clips and attaching the electrical connector. Then, fit the wheel speed speed sensor (2) to the hub (3) and link it with the wheel speed sensor mounting bolt (1) until it reaches 21 Nm (190 in. lbs.). After you've installed the back rotor, next install the front rotor and caliper assembly.

OEM 2008 Dodge Durango Speed Sensor

Speed Control Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Speed Sensor found

View related parts
2008 Dodge Durango Speed Sensor, Rear Passenger Side Part Number: 56029317AB
Product Specifications
- Other Name: Sensor - Wheel Speed; ABS Wheel Speed Sensor, Rear Left, Rear Right; ABS Sensor; Rear Speed Sensor
- Position: Rear Passenger Side
- Replaces: 56029317AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.5 x 1.6 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56029317AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Durango Submodels:
- Adventurer, Limited, Limited Hybrid, SE, SLT, SXT | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS

2008 Dodge Durango Speed Sensor Parts and Q&A

Q: How to Install a Speed Sensor on the Front Wheel on 2008 Dodge Durango?
A: You should start by connecting the cable to the clips and attaching the electrical connector. Then, fit the wheel speed speed sensor (2) to the hub (3) and link it with the wheel speed sensor mounting bolt (1) until it reaches 21 Nm (190 in. lbs.). After you've installed the back rotor, next install the front rotor and caliper assembly.