How to Install a Tie Rod End on 2007 Dodge Durango?

To install the outer tie rod end, be sure that the boot is untwisted. Thread the outside tie rod end onto the inside tie rod and then fit it into the steering knuckle. Tighten ball stud nut to 75 newton metres, adjust the toe pattern of the wheel and tighten the jam nut, 109 newton metres.

OEM 2007 Dodge Durango Tie Rod End

Steering Rod End

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Tie Rod End found

View related parts
2007 Dodge Durango Outer Tie Rod Part Number: 52855190AC
$86.04 MSRP: $127.00
You Save: $40.96 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tie Rod - Outer End; Steering Tie Rod End, Outer; Drag Link Repair Kit; Outer Tie Rod End; Tie Rod Kit Outer End; Tie Rod End
- Position: Outer
- Replaces: 52855190AB
- Item Weight: 2.00 Pounds
- Item Dimensions: 5.2 x 4.6 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 52855190AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Durango Submodels:
- Adventurer, Limited, SLT, ST, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2007 Dodge Durango Tie Rod End Parts and Q&A

Q: How to Install a Tie Rod End on 2007 Dodge Durango?
A: To install the outer tie rod end, be sure that the boot is untwisted. Thread the outside tie rod end onto the inside tie rod and then fit it into the steering knuckle. Tighten ball stud nut to 75 newton metres, adjust the toe pattern of the wheel and tighten the jam nut, 109 newton metres.