How to Install a Liftgate Hinge on 2007 Dodge Grand Caravan?

To fit the trunk or liftgate hinge, paint where necessary, fit it to the liftgate with bolts tightened to 33 Nm (24 ft. lbs.). And then the next step is to fit it to the roof header, tightening the outer bolts to 33 Nm and the center screw to 12 Nm. Almost at the end, there is check liftgate alignment.

OEM 2007 Dodge Grand Caravan Liftgate Hinge

Luggage Compartment Door Hinge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Liftgate Hinges found

View related parts
2007 Dodge Grand Caravan Hinge Part Number: 5020512AD
$35.87 MSRP: $62.25
You Save: $26.38 (43%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Liftgate; Liftgate Hinge; Door Hinge; Hinge Liftgate
- Replaces: 5020512AC
- Item Weight: 1.30 Pounds
- Item Dimensions: 5.5 x 3.8 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5020512AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Grand Caravan Submodels:
- Base, SE, SXT | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
2007 Dodge Grand Caravan Hinge Part Number: 5020513AD
$44.84 MSRP: $62.25
You Save: $17.41 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Liftgate; Liftgate Hinge; Door Hinge; Hinge Liftgate
- Replaces: 5020513AC
- Item Weight: 1.30 Pounds
- Item Dimensions: 5.4 x 3.7 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5020513AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Grand Caravan Submodels:
- Base, SE, SXT | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS

2007 Dodge Grand Caravan Liftgate Hinge Parts and Q&A

Q: How to Install a Liftgate Hinge on 2007 Dodge Grand Caravan?
A: To fit the trunk or liftgate hinge, paint where necessary, fit it to the liftgate with bolts tightened to 33 Nm (24 ft. lbs.). And then the next step is to fit it to the roof header, tightening the outer bolts to 33 Nm and the center screw to 12 Nm. Almost at the end, there is check liftgate alignment.